Lexicon RV Receiver manual To activate the Test Tone

RV-5

To activate the Test Tone:

1.Press the Menu or Select button to enter the Menu structure.

2.Select Setup from the Main menu.

3.Select Speaker/EQ Setup.

4.Select Manual.

5.Select Output Levels.

6.	Press the remote control	and	arrows to highlight the Test
	Tone parameter.
7.	Press the remote control SELECT or		arrow button to select
	the Test Tone parameter.
8.	Press the remote control	arrow to select manual test tones.
	The Test Tone parameter displays MANUAL and the highlighted
	parameter is now Front Left. You should hear the test tone in
	the Front Left speaker.
9.	Press the remote control	arrow to select automatic test
	tones. The Test Tone parameter displays AUTO and the
	highlighted parameter is now Front Left. You should hear the
	test tone in the Front Left speaker, then in the Center speaker,
	and so on through the list. After the last speaker, the test tone
	will return to the Front Left speaker and continue down the list
	again.
10.	To stop the Test Tone, use the remote control and arrows
	to highlight the Test Tone parameter. The parameter will
	change to OFF. The test tone can no longer be heard through
	any of the speakers.

Setup

3-13