Lexicon RV Receiver manual Audio Controls, Auto EQ, EQ Preset

Audio Controls & Video Status Lexicon

AUDIO CONTROLS

Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the AUTOCAL settings, except for the Audio Status parameter.

MAIN MENU

AUDIO CONTROLS

VIDEO STATUS SETUP

AUDIO CONTROLS

AUTO EQ: ON

EQ PRESET

EQ ADJUST

TONE CONTROLS: OFF

BASS: 0dB

TREBLE: 0dB

AUDIO STATUS

EQ ADJUST

HF SHELF: 0dB

AUDIO STATUS

INPUT: HD+

NAME:

CONNECTOR: ANALOG 3

AUDIO: - - -

MODE FAMILY: LOGIC 7

MODE: MUSIC 5.1

EQ PRESET

ACTIVE PS: USER

PRESET 1: FACTORY

PRESET 2: FACTORY

PRESET 3: FACTORY

AUTO EQ OFF, ON

AUDIO CONTROLS AUTO EQ: ON

If the AUTOCAL process is performed and the settings are saved, then the Auto EQ parameter identifies if the saved AUTOCAL settings are being actively applied to the system. When the Auto EQ parameter is OFF, the AUTOCAL settings are not applied.

Note: When the AUTO EQ parameter is OFF, the EQ ADJUST parameter is also not applied.

EQ PRESET PRESET 1, PRESET 2, PRESET 3, USER

AUDIO CONTROLS EQ PRESET

Identifies the three preset locations where the AUTOCAL settings are saved, and displays the state of each preset (saved or unused). The Active PS, or Active Preset, parameter identifies the preset

location that is currently active if the AUTO EQ parameter is set to ON for any input. The Active Preset can be set to any of the three saved preset locations.

The Preset locations cannot be selected and are present only to identify the current state of each location. If the location indicates “SET” then the preset location has AUTOCAL settings saved to it. If the location indicates “FACTORY”, then the preset location has not been used and remains at the default factory settings.

Note: If all three Preset locations indicate “FACTORY”, then the AUTOCAL procedure has not yet been done, or at the least, the settings have not been saved.

For more information on the AUTOCAL process, refer to Section 3: Setup.

4-2