DI-624M User’s Manual | Troubleshooting |
7.I forgot my encryption key.
Reset the DI-624M to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current configuration settings.
8.Resetting the DI-624M to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-624M to the factory default settings. Remember that D-Link Super G
MIMO products network together, out of the box, at the factory default settings.
R e s e t
Button
To hard-reset the DI-624M to Factory Default Settings, please do the following:
Locate the Reset button on the back of the DI-624M.
Use a paper clip to press the Reset button.
Hold for about 10 seconds and then release.
After the DI-62M reboots (this may take a few minutes) it will be reset to the factory Default settings.
