| Using the Configuration Menu |
Performance
Advanced > Performance
Note: These features will be available in future firmware releases.
TX Rate:
Transmit Power:
Beacon Interval:
RTS Threshold:
Fragmentation:
Auto is the default selection. Select from the drop down menu.
100% is the default selection. Select from the drop down menu.
Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended.
This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made.
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
33 |
