Aiwa AV-X220 manual Presetting Stations, Ll@, Repeat steps 1, To clear a preset station

PRESETTING STATIONS

		E=ii
		000
		000
		000
		an
		0:;0
		00
		0	UPFEI
ll_@-	——-—	00
		I uDOWN
	Qi@’Ql@

The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.

1 Press the TUNER button to select the band, and press the UPA or DOWN7 button to select a station. Direct tuning is also available.

2Press the SET button to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Frequency

Preset “number

3Repeat steps 1 and 2.

No ‘more stati&s will be stored if a total of 32 stations have already been stored for all the bands.

m

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

PRESET NUMBER TUNING

1 Press the TUNER button to select a band.

2 Press the numbered buttons to select a preset number.

Example:

To select preset number 25, press 2 and 5.

To select preset number 7, press O and 7.

To clear a preset station

Select the preset number of the station to be cleared. Then, press the SET button, and press the SET button again within four seconds.

The preset numbers of all other stations in the band with higher numbers are decreased by one.

When using the remote control

Press UPM or DOWNK button to select a preset number.

m

The DIGIT buttons on the remote control can not be used when selecting a preset number.

11 ENGLISH