Connecting An Outdoor Antenna, About The Remote Control

CONNECTING THE SUPPLIED ANTENNAS @

Connect the FM antenna to the FM 75 Q terminals and the AM antenna to the AM LOOP terminals.

FM antenna

antenna

To stand the AM loop antenna on a surface Fix the claw to the slot as shown in the illustration.

To position the antennas

FM feeder antenna:

Extend this antenna horizontally in a T shape and fix its ends to the wall.

AM loop antenna:

Position for the best reception.

●Do not bring the FM antenna near metal objects or curtain rails.

●Do not bring the AM antenna near other external equipment, the unit itself, the AC power cord or speaker cords, as noise will be picked up.

●Do not unwind the AM loop antenna wire.

ABOUT THE REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well.

●If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor in the display window is exposed to intense light, such as direct sunlight.

-Other remote controls are used nearby (those of television, etc. )

Remote control operation

This remote control system allows you to operate other external equipment besides the AIWA receiver. For details of the remote control operation for other external equipment, see “REMOTE CONTROL” on page 14.

Hereupon, it is explained how to operate the Aiwa receiver.