Aiwa AV-X220 Care And Maintenance, Specifications, FM tuner section, AM tuner section, Tuning

CARE AND MAINTENANCE

Occasional care and maintenance of the unit is needed to optimize the performance of your unit.

To clean the cabinet Use a soft dry cloth.

If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner as these could damage the finish of the unit.

SPECIFICATIONS

FM tuner section

Tuning	range	87.5 Mt+z to 108 MHz
Usable	sensitivity	13.2 dBf

(IHF)

Antenna terminals 75 ohms (unbalanced)

AM tuner section

Tuning range	530	kHz to 1710 kHz (10 kHz step),
	531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity	350	pVlm
Antenna	Loop antenna

Amplifier section

Power output	[Stereo Mode]
	Front
	125 watts per channel, Min. RMS at 4
	or 8 ohms, from 40 Hz to 20 kHz, with
	no more than 0.8% Total Harmonic
	Distortion
	[Dolby Pro Logic Mode]
	Front
	120 waitts per channel, Min. RMS at 4
	or 8 ohms (selectable), from 40 Hz to
	20 kHz, with no more than 0.97. Total
	Harmonic Distortion
	Rear (Surround)
	60 watts per channel, Min. RMS at 8
	ohms, 1 kHz, with no more than 0.90/0
	Total Harmonic Distortion
	Center
	120 watts, Min. RMS at 4 or 8 ohms
	(selectable), 1 kHz, with no more than
	0.9% Total Harmonic Distortion
Total harmonic	0.07 % (105 W, 1 kHz, 8 ohms, Front)
distortion
Inputs	AUDIO IN
	f>HONO: 2.8 mV (50 kohms)
	CD: 370 mV (50 kohms)
	TAF’E MONITOR: 200 mV (25
	kohms)
	\/lDEO 1, VIDEO 2/LD/MD,
	VIDEO 3, AUWTV 370 mV (50
	kohms)
	VIDE;O IN: 1 Vp-p (75 ohms)
outputs	AUDIO OUT (REC OUT): 230 mV (2
	kohrns)
	VIDEO OUT (MONITOR): 1 Vp-p (75
	ohms)
	SUPER WOOFER: 3.1 V
	FRONT SPEAKERS IMP: 8Q/4Q
	selectable (front speakers A and B):
	With the SPEAKER IMPEDANCE
	SELECTOR set to 4Q, accepts
	speakers of 4 ohms.
	With the SPEAKER IMPEDANCE
	SELECTOR set to 8f2, accepts
	speakers of 8 ohms or more.
	SURRCWND SPEAKERS IMP: 8Q
	(surround speakers): accepts
	speakers of 8 ohms or more

ENGLISH 16