To Copy in Zoom Mode, Touch OK | Konica Minolta 7135, 7130 guide

Selecting Magnification Ratio (Lens Mode) (continued)

To Copy in Zoom Mode

Use the Zoom mode to reduce or enlarge the copied original image in 1% increments.

>>> Specification for Zoom Mode <<<

Zoom range: 25% to 400%

Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image Shift

1. Touch ZOOM on the Basic Screen.

The popup menu for setting a zoom ratio will be displayed.

Reminder!

When starting a new copying job, be sure to close the RADF securely, then press [AUTO RESET].

2. Touch the Vertical/Horizontal zoom key on the popup menu, if it is not highlighted, then set the desired zoom ratio.

DETAILS

Use the keypad on the popup menu to enter the desired magnification ratio in 3 digits, or use arrows (c / d) to scroll to the desired ratio.

If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.

3. Touch OK.

The popup menu disappears automatically and the specified zoom ratio will be displayed on the Basic Screen.

4.

5.

Select additional copy conditions, as desired.

Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

3-14

Image 64

Konica Minolta 7135, 7130 manual To Copy in Zoom Mode, Touch Zoom on the Basic Screen, Touch OK, Specification for Zoom Mode

Contents

7022/7130/7135 Workgroup Document System Page Konica 7022/7130/7135 Correspondence Contents Safety InformationBasic Machine Information Contents Troubleshooting Machine Specifications Advanced Information AdvancedApplications Key Operator Mode Maintenance & SuppliesPaper and Original Information Contents Index Features of the Konica 7022/7130/7135 Features of the Konica 7022/7130/7135 Lens Mode RE, Zoom Output Mode for Machine with FS-107 Finisher InstalledOutput Mode for Machine with IT-101 Inner Tray Installed Job Memory Power Saver Paper CapacityPlaten Memory Proof Copy Weekly Timer Sheet/Cover InsertionStamp StaplePage Safety Information BasicMachine Information Page Safety Information Precautions for Installation and Use High Température ¡Temperatura Alta Temperature Élevée Reminder Regulations FCC RegulationsFDA Regulations Canadian Department of Communications Regulations Power Source Requirements for Safe Use Requirements for Safe Use Environment Requirements for Safe Use 21.7 550 17.7 22.8 19.7 450 580 500 26.1 60.0 Precautions for Routine Handling Requirements for Safe Use Requirements for Safe Use Page Machine Configuration, Turning On Power and Loading Paper Machine Configuration External Machine Items Machine Configuration Transfer/Separator wire cleaning lever forms the copy image Machine ConfigurationInternal Machine Items Machine Configuration Standard/Optional Equipment Basic Screen COUNT/SET Machine Configuration Control Panel Layout Turning On the Power Switch To Turn On the PowerTurn on the main power switch Turn on the power switch Turning On the Power Switch Basic Screen will be displayed Turn OFF the power switch To Turn Off the PowerTurn OFF the main power switch Reducing the Power in Standby Mode Auto Low Power Shutting Off Automatically Auto Shut-Off Shutting Off / Reducing the Power Manually Turning On the Power SwitchPower save mode will be activated Entering an ECM Password ECM Enter ECM passwordPress Start Start a copying job Loading Paper in Main Body Trays and DB-210 Trays Loading PaperWithdraw the main body tray or DB-210 tray Stack paper with curl side up Loading PaperPush in the tray until it locks into place Loading Paper in DB-410 Tray Withdraw the DB-410 tray When copying is completed, close the Multi-sheet bypass tray Loading Paper in Multi-Sheet Bypass Tray Withdraw the tray for which the paper size will be changed Changing Paper Size of Main Body Trays and DB-210 TraysSet the size indication dial at the correct paper size Page How to Make a Basic Copy Copying Operations Adjust paper guides Positioning OriginalsPositioning Originals in Radf Position originals Face UP in the document feeder tray Positioning Originals Positioning originals in Mixed original modeDocument feeder tray Positioning originals in Folded original mode Positioning Original on Platen Glass Raise the document feeder or platen cover Positioning Originals Setting Print Quantity To Set Print QuantityTo Change Print Quantity Enter the correct quantity To Select Copy Size Automatically APS Selecting Copy SizePosition originals Selecting Copy Size 11x17 To Specify Desired Copy Size AMS Original Size AMS Table Selecting Magnification Ratio Lens Mode To Copy in 1.00 Magnification ModeClose the Radf securely, then press Auto Reset Select additional copy conditions, as desired Selecting Magnification Ratio Lens Mode To Copy in Fixed Magnification Mode RESpecification for Fixed Magnification Mode Touch RE on the Basic Screen To Copy in Zoom Mode Specification for Zoom ModeTouch Zoom on the Basic Screen Touch OK Copying Selecting Density Level To Select Copy Density Selecting Density Level Using Radf Making Double-Sided Copies 1a2, 2a2Front Back Front Making Double-Sided Copies 1a2, 2a2 Position originals Face UP in the document feeder Using Platen Glass Specification for Double-Sided Copying Using Platen GlassOpen the document feeder Position original Face Down on the platen glass Press Start to print Front Back Touch 2a1 on the Basic Screen to highlight it Press Start Copying Using Memory To Scan Originals into Memory Store ModeSpecification for Store Mode Make copying selections, as desired Copying Using Memory Touch Store Mode to highlight it Touch Scan on the Basic Screen to scan Specifications for Reserve To Set Next Copying Job ReservePress Start to start scanning/printing for the current job Touch Reserve to highlight it Press Start to start scanning for the reserve job To Check/Control Jobs in Progress Job List Screen Perform the desired setting on the screenTouch JOB List on the Basic Screen Contents of Job List Screen Touch OK on the Job List Screen Output Mode for Machine without Finisher Specification for Output Modes without Finisher Select the desired output mode Output Mode for Machine without FinisherPress Output on the control panel Output without Finisher Output Mode for Machine with Finisher Output Mode for Machine with Finisher Specification for Output Modes with Finisher Output Mode for Machine with Finisher Select the desired staple position IT-101 Output Modes Check Mode Proof Copy Interrupt Output Mode for Machine with Inner Tray IT-101 Specification for Output Modes with Inner Tray Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Specifications for Check Mode and Proof Copy Press Check on the control panel Checking Feature Selections and Proof Copying Touch Exit or press Check to return to the Basic Screen Checking Feature Selections and Proof CopyingChange the print quantity, as required Interrupt Copying Press Interrupt on the control panel When Interrupt copying is completed, press Interrupt again Interrupt CopyingSet copy conditions, as desired Press Start to start the interrupt copying Interrupt Copying Job Memory & Help Mode How to Use Helpful Functions Specifications for Job Memory Storing Job Conditions Job Memory Job Store Storing Job Conditions Job Memory Job Store Review the settings on the Job Store Check ScreenTouch Entry Enter a job name Job Memory Help Mode Recalling Stored Job Settings Job Memory Job Recall If desired, touch JOB Check Recalling Stored Job Settings Job Memory Job RecallPosition originals, then press Start to print Return to the Basic Screen, then press Help To Display the Help Screen from Basic ScreenTouch the desired key to display specific information Touch Exit to return to the Basic Screen Displaying Screen for Operation Guide Help ModeDetails Help Menu Screen While in any screen other than the Basic Screen, press Help To Display Help Screen from Other ScreensTouch Exit Troubleshooting How to Handle Machine Troubles When Call for Service Message Is Displayed Turn OFF the power switch and main power switch Turn OFF then on the power switch Preventive Maintenance Clearing Mishandled Paper Follow the procedure on the screen to remove misfed paperTouch Guide on the screen When completed, the Basic Screen will be restored Clearing Mishandled Paper Display the Jam Position Screen When JAM Appears on Folder KeyTouch Guide When JAM Appears on Folder Key Touch Reserve to continue the reserve job setting Display the Basic Screen for the print job in progress Check the empty tray, then supply that tray with paper Action Wait until the current operation is completedCheck the original pages, then position originals again Press Start to complete the job Press Start to continue copying When Memory Full Message Is Displayed Memory OverflowFollowing message displays When Power OFF/ON Screen Is Displayed Wait about 10 seconds Turn on the power switch Troubleshooting Tips Copy Image is TOO Light Troubleshooting Tips Copy Quality is Poor Troubleshooting Tips Please Check OriginalPage Machine Specifications Main Body & Option Specifications Main Body Specifications Main Body Specifications Main Body Specifications Option Specifications Page Advanced Page How to Use Advanced Functions Advanced Information Press the power switch Programmed Shut-Off Weekly TimerEnter the password Set the duration for the interrupt use Programmed Shut-Off Weekly TimerPress Start Set the minute for the interrupt use Rotation Rotation Touch Auto to deselect it Vertical/Horizontal Zoom Mode Vertical/Horizontal Zoom Mode Specifications Vertical/Horizontal Zoom Mode Details How to Use Application Functions Applications To Display Application Selection Screen Touch OK on the Application Selection Screen Specifications for Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Select the desired insertion mode Select the desired cover modeSelect the cover sheet tray source Enter the page number Inserting Sheets and Covers Sheet/Cover Insertion Details Entering Page Numbers Specifications for Chapter Positioning Title Pages on the Right Side Chapter Positioning Title Pages on the Right Side Chapter When all entries are made, touch OKTouch Chapter on the Application Selection Screen Positioning Title Pages on the Right Side Chapter Specifications for Combination Lay Out Several Pages onto One Sheet Combination Lay Out Several Pages onto One Sheet Combination Select the desired Combination modeTouch Combination on the Application Selection Screen Details Original Type and Layout Order Original Portrait type Landscape type Specifications for Booklet Making a Multiple Page Signature Booklet Booklet Touch to highlight the desired Booklet mode key Touch OK Select the 1a2 or 2a2 copy mode and the desired paper sizeMaking a Multiple Page Signature Booklet Booklet Touch Booklet on the Application Selection Screen Position originals Face UP in the document feeder Specifications for Transparency Copying onto Transparent Films Transparency Copying onto Transparent Films Transparency For details on positioning originals, see p -2 to p Specifications for Image Insert Inserting Images into Printed Sets Image Insert Touch Image Insert on the Application Selection Screen Inserting Images into Printed Sets Image InsertUse the control panel keypad to enter the page number Inserting Images into Printed Sets Image Insert Touch Scan on the Basic ScreenScan the platen glass images Touch Scan Specifications for Book Copy Dividing an Image into Right and Left Pages Book Copy Dividing an Image into Right and Left Pages Book Copy Select the desired Book Copy modeTouch Book Copy on the Application Selection Screen Select the desired copy mode and magnification Scanning Original for Cover Dividing an Image into Right and Left Pages Book Copy Specifications for Mixed Original Copying Mixed Size Originals Mixed Original Copying Mixed Size Originals Mixed Original Touch Special Original on the Application Selection Screen Copying Mixed Size Originals Mixed Original Position mixed originals Face UP in the document feeder Specifications for Folded Original Copying Folded Originals Folded Original Copying Folded Originals Folded Original Position folded originals Face UP in the document feeder Copying Folded Originals Folded Original Specifications for Non-Standard Size Copying Non-Standard Size Originals Non-Standard Size Copying Non-Standard Size Originals Non-Standard Size Touch Non-standard Size Reverse the Second Side in 1-2 Mode Upside Down Specifications for Upside Down Reverse the Second Side in 1-2 Mode Upside Down Touch 1-2 Upside down or 2-1 Upside downPage Text Mode Photo ModeIncrease Contrast Mode Specifications for Text/Photo Enhance Making Copy Quality Closer to Originals Text/Photo Enhance Touch OK to return to the Application Selection Screen Reverse Image Repeat Specifications for Reverse Image Reversing Color in Black and White Image Reverse Image Touch Reverse Image on the Application Selection Screen Reversing Color in Black and White Image Reverse ImageTouch OK on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Vertical/Horizontal Width Setting Mode Specifications Repeating Selected Image Area Repeat Verti./Horiz. Mode Touch Repeat on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Select the desired magnification and copy size Auto Detection/ Repeat Mode Specifications Repeat mode Touch Auto or Repeat, as desired Touch to highlight the desired mode key Position original Specifications for Frame/Fold Erasure Copying Frame/Fold Erasure Selection Screen will be displayed Touch OK Specifications for Auto Layout Copying Image in the Center of Copy Paper Auto Layout Touch Auto Layout on the Application Selection Screen Details Adjusting Position of Copy Image Image Shift Specifications for Image Shift Touch Image Shift on the Application Selection Screen Adjusting Position of Copy Image Image ShiftTouch Image Shift, then specify the shift amount Adjusting Position of Copy Image Image Shift Specifications for Reduce & Shift Reducing Images to Create Binding Margin Reduce&Shift Reducing Images to Create Binding Margin Reduce&Shift Touch Reduce & Shift, then specify the shift amount Touch OK Specifications for Non-Image Area Erase Erasing Outside of the Original Non-Image Area Erase Erasing Outside of the Original Non-Image Area Erase Select magnification and copy size, as desired Erasing Outside of the Original Non-Image Area Erase Details Oblique Erase and Rectangle Erase Modes Specification for Stamp Printing Stamp, Page, Watermark onto Copies Stamp Touch Stamp on the Application Selection Screen Printing Stamp, Page, Watermark onto Copies StampTouch to select the desired key Printing Stamp, Page, Watermark onto Copies Stamp Touch OK Details Print Position Selection Screen Specification for Overlay Overlaying an Image onto Each Page Copied in the Job Overlay Touch STAMP/OVERLAY on the Application Selection Screen Touch Overlay Touch OK on the Stamp/Overlay Selection Screen Position the originals to be overlaid Page Paper and Original Paper Weight Paper Information Paper Information Tray/ Exit Tray Capacity Paper Information Paper Size Special Paper in Multi-Sheet Bypass Tray To Store Copy Paper Platen Glass Original Specifications Original InformationPlaten Glass Originals Unsuitable Radf Originals Normal mode Mixed Original modeOriginal Information Radf Originals Folded Original mode Original Information Maintenance & Supplies How to Maintain the Copier Adding Toner Adding Toner 10-4 Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher 10-8 Cleaning Image Scanning Section Cleaning the Document Glass and Cover Cleaning Image Scanning Section Cleaning the RadfCleaning the Left Partition Glass Cleaning the Radf Platen Guide Cover Cleaning the Radf Roller Cleaning Image Printing Section Cleaning the Writing Unit Glass and the Electrode Wires Cleaning Image Printing Section Checking Copy Count Press Counter on the control panel Maintenance, Repairs, Supplies ServiceRepairs SuppliesPage How to Monitor Copier Activity and Modify Machine Settings How to Access the Key Operator Mode To Display the Key Operator Mode Screen How to Access the Key Operator Mode Touch Return to exit the Key Operator mode System Initial Time System Initial Language Initial Setting Copier Initial Copy Mode Copier Initial Density Magnification Copier Initial Tray Output Machine with FinisherMachine with Inner Tray Machine without Finisher Machine with Inner tray Non-Image Erase Touch Oblique erase or Rectangular erase, as desired Preset Key Preset Key Preset Key C.M. Electronic Copy Monitor How to Access the ECM Setting Mode C.M. Electronic Copy Monitor Change ECM Data C.M. Electronic Copy Monitor ECM Data List C.M. Electronic Copy Monitor All Counter Reset Reset the count for all ECM password Nos ECM On/Off Setting 11-25 Copy Limit Reached Effect Lock Job Memory Paper Type Panel Contrast Key Operator Data Weekly Timer Weekly Timer How to Access the Weekly Timer Setting Mode Weekly Timer Setting Weekly Timer Copier ON/OFF Time Set Weekly Timer Machine Working Day Individual Set Weekly Timer Lunch Hour Off Function Touch off-time Password Setting Touch Panel Adjustment Power Save 11-41 Memory Switch SW No Setting default is underlined Memory Switch Auto reset timer Auto Reset effectAuto tray switch Load Radf effect Memory Switch No-printing timer Power save key20 5.5x8.5 orig. type 22 1 Shot indication time List Print Application Customize Setting options Density shift 0/ 1/ 2/ 3 standard/ 4 Density Shift Krds Host Index Page Symbol Number Index Iii Index Page August