Konica Minolta 7130, 7135 Setting Print Quantity, To Set Print Quantity, To Change Print Quantity

Setting Print Quantity

This section describes how to set or change print quantity.

To Set Print Quantity

The copier is initially set to copy the original set in amounts determined by the print quantity setting, then outputs sorted sets.

1. Enter the desired print quantity on the control panel keypad.

3

Copying Operations

DATA				Positioning
	SCANNER / PRINTER		FAX
				Originals
HELP
1	2	3		Setting Print
				Quantity
CHECK
4	5	6		Copy Size
APPLICATION
7	8	9
OUTPUT				Lens Mode
	0
AUTO RESET	CLEAR QTY.			Density
Entered quantity will be displayed on the touch panel.				1-1, 2-2

To Change Print Quantity

Follow the procedure below to change the print quantity after it has been entered.

1. Press [# (CLEAR QTY.)].

DATA
	SCANNER / PRINTER	FAX
HELP
1	2	3
CHECK
4	5	6
APPLICATION
7	8	9
OUTPUT
	0
AUTO RESET	CLEAR QTY.

The quantity displayed on the touch panel will return to 1.

2-1

Using

Memory

Output without

Finisher

FS-107

Output Modes

IT-101

Output Modes

Check Mode

&Proof Copy

Interrupt

Mode

2. Enter the correct quantity.

Entered quantity will be displayed on the touch panel.

3-7