Konica Minolta 7135, 7130 manual Output Mode for Machine with Inner Tray IT-101

Output Mode for Machine with Inner Tray IT-101

This section describes the following four output modes for a copier with the Inner Tray. Non-sort mode is initially selected.

The Inner Tray IT-101 is equipped with two exit trays.

1Non-sort mode copies the original set in amounts determined by the print quantity setting, then outputs sorted sets normally.

2Rotation sort mode rotates every other sorted sets by 90° upon exit, provided the same paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and 8.5”x11”R.

3Group mode copies each original page in amounts determined by the print quantity setting, then outputs grouped sets normally.

4Rotation group mode rotates every other grouped set by 90° upon exit, provided the same paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and 8.5”x11”R.

	Originals	23	Example:
	1		3-set copies
Non-sort (default)	Rotation sort		Group	Rotation group

>>>Specification for Output Modes with Inner Tray<<<

❒Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, Transparency, Image Insert, Repeat, AUTO Layout, Non-Image Area Erase, Stamp (Numbering)

❒Incompatible with Rotation sort mode: Sheet/Cover Insertion, Booklet, Transparency, Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image Area Erase

❒Incompatible with Rotation group mode: Using platen glass (unless Chapter with Platen store mode, Upside down, Image Shift, or Stamp (excluding Numbering) is used), Proof Copy, Sheet/Cover Insertion, Booklet, Transparency, Image Insert, Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image Area Erase, Stamp (Numbering)

3-38