ECM On/Off Setting, 11-25 | Konica Minolta 7130, 7135 instruction

[4]E.C.M. (Electronic Copy Monitor) (continued)

[4]ECM On/Off Setting

Use this function to turn ECM ON or OFF. If the machine has the optional Fax kit and Printer Controller installed, set ECM ON or OFF individually for COPIER, FAX, and PRINTER mode.

NOTE:

If ECM OFF is selected while ECM functions, the copier will be enabled to perform copying jobs without an ECM password entered, and both copy count and copy limit functions will be discontinued.

❒Default setting: ECM on

ECM Setting Menu Screen	ECM On/Off Setting Screen
	(machine without Fax kit and Printer Controller)

ECM On/Off Setting Screen

(machine with Fax kit and Printer Controller)

Procedure

1Touch 4. ECM On/Off setting on the ECM Setting Menu Screen to display the ECM On/Off Setting Screen.

2Touch ON to activate ECM or touch OFF to de-activate ECM. The selected key will be highlighted.

3Touch OK to complete the settings and return to the ECM Setting Menu Screen. If other ECM setting changes are required, touch the desired key.

4Touch RETURN to restore the Key Operator Mode Screen.

5Touch RETURN to restore the Basic Screen to perform copying operations.

11-25

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11

Key Operator Mode

Image 261

Konica Minolta 7130, 7135 manual ECM On/Off Setting, 11-25

Contents

7022/7130/7135 Workgroup Document System Page Konica 7022/7130/7135 Correspondence Safety Information ContentsBasic Machine Information Contents Machine Specifications Troubleshooting Advanced Advanced InformationApplications Maintenance & Supplies Key Operator ModePaper and Original Information Index Contents Features of the Konica 7022/7130/7135 Features of the Konica 7022/7130/7135 Output Mode for Machine with FS-107 Finisher Installed Lens Mode RE, ZoomOutput Mode for Machine with IT-101 Inner Tray Installed Job Memory Paper Capacity Power SaverPlaten Memory Proof Copy Sheet/Cover Insertion Weekly TimerStamp StaplePage Safety Information BasicMachine Information Page Precautions for Installation and Use Safety Information High Température ¡Temperatura Alta Temperature Élevée Reminder FCC Regulations RegulationsFDA Regulations Canadian Department of Communications Regulations Requirements for Safe Use Power Source Environment Requirements for Safe Use Requirements for Safe Use 21.7 550 17.7 22.8 19.7 450 580 500 26.1 60.0 Precautions for Routine Handling Requirements for Safe Use Requirements for Safe Use Page Power and Loading Paper Machine Configuration, Turning On External Machine Items Machine Configuration Machine Configuration Machine Configuration Transfer/Separator wire cleaning lever forms the copy imageInternal Machine Items Standard/Optional Equipment Machine Configuration COUNT/SET Basic Screen Machine Configuration Control Panel Layout To Turn On the Power Turning On the Power SwitchTurn on the main power switch Turn on the power switch Basic Screen will be displayed Turning On the Power Switch To Turn Off the Power Turn OFF the power switchTurn OFF the main power switch Shutting Off Automatically Auto Shut-Off Reducing the Power in Standby Mode Auto Low Power Turning On the Power Switch Shutting Off / Reducing the Power ManuallyPower save mode will be activated Enter ECM password Entering an ECM Password ECMPress Start Start a copying job Loading Paper Loading Paper in Main Body Trays and DB-210 TraysWithdraw the main body tray or DB-210 tray Loading Paper Stack paper with curl side upPush in the tray until it locks into place Withdraw the DB-410 tray Loading Paper in DB-410 Tray Loading Paper in Multi-Sheet Bypass Tray When copying is completed, close the Multi-sheet bypass tray Changing Paper Size of Main Body Trays and DB-210 Trays Withdraw the tray for which the paper size will be changedSet the size indication dial at the correct paper size Page Copying Operations How to Make a Basic Copy Positioning Originals Adjust paper guidesPositioning Originals in Radf Position originals Face UP in the document feeder tray Positioning originals in Mixed original mode Positioning OriginalsDocument feeder tray Positioning originals in Folded original mode Raise the document feeder or platen cover Positioning Original on Platen Glass Positioning Originals To Set Print Quantity Setting Print QuantityTo Change Print Quantity Enter the correct quantity Selecting Copy Size To Select Copy Size Automatically APSPosition originals 11x17 Selecting Copy Size To Specify Desired Copy Size AMS Original Size AMS Table To Copy in 1.00 Magnification Mode Selecting Magnification Ratio Lens ModeClose the Radf securely, then press Auto Reset Select additional copy conditions, as desired To Copy in Fixed Magnification Mode RE Selecting Magnification Ratio Lens ModeSpecification for Fixed Magnification Mode Touch RE on the Basic Screen Specification for Zoom Mode To Copy in Zoom ModeTouch Zoom on the Basic Screen Touch OK Copying To Select Copy Density Selecting Density Level Selecting Density Level Making Double-Sided Copies 1a2, 2a2 Using RadfFront Back Front Position originals Face UP in the document feeder Making Double-Sided Copies 1a2, 2a2 Specification for Double-Sided Copying Using Platen Glass Using Platen GlassOpen the document feeder Position original Face Down on the platen glass Press Start to print Touch 2a1 on the Basic Screen to highlight it Front Back Press Start To Scan Originals into Memory Store Mode Copying Using MemorySpecification for Store Mode Make copying selections, as desired Touch Store Mode to highlight it Copying Using Memory Touch Scan on the Basic Screen to scan To Set Next Copying Job Reserve Specifications for ReservePress Start to start scanning/printing for the current job Touch Reserve to highlight it Press Start to start scanning for the reserve job Perform the desired setting on the screen To Check/Control Jobs in Progress Job List ScreenTouch JOB List on the Basic Screen Touch OK on the Job List Screen Contents of Job List Screen Specification for Output Modes without Finisher Output Mode for Machine without Finisher Output Mode for Machine without Finisher Select the desired output modePress Output on the control panel Output without Finisher Output Mode for Machine with Finisher Specification for Output Modes with Finisher Output Mode for Machine with Finisher Select the desired staple position Output Mode for Machine with Finisher IT-101 Output Modes Check Mode Proof Copy Interrupt Specification for Output Modes with Inner Tray Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Press Check on the control panel Specifications for Check Mode and Proof Copy Checking Feature Selections and Proof Copying Checking Feature Selections and Proof Copying Touch Exit or press Check to return to the Basic ScreenChange the print quantity, as required Press Interrupt on the control panel Interrupt Copying Interrupt Copying When Interrupt copying is completed, press Interrupt againSet copy conditions, as desired Press Start to start the interrupt copying Interrupt Copying How to Use Helpful Functions Job Memory & Help Mode Storing Job Conditions Job Memory Job Store Specifications for Job Memory Review the settings on the Job Store Check Screen Storing Job Conditions Job Memory Job StoreTouch Entry Enter a job name Job Memory Help Mode Recalling Stored Job Settings Job Memory Job Recall Recalling Stored Job Settings Job Memory Job Recall If desired, touch JOB CheckPosition originals, then press Start to print To Display the Help Screen from Basic Screen Return to the Basic Screen, then press HelpTouch the desired key to display specific information Displaying Screen for Operation Guide Help Mode Touch Exit to return to the Basic ScreenDetails Help Menu Screen To Display Help Screen from Other Screens While in any screen other than the Basic Screen, press HelpTouch Exit How to Handle Machine Troubles Troubleshooting Turn OFF the power switch and main power switch When Call for Service Message Is Displayed Turn OFF then on the power switch Preventive Maintenance Follow the procedure on the screen to remove misfed paper Clearing Mishandled PaperTouch Guide on the screen Clearing Mishandled Paper When completed, the Basic Screen will be restored When JAM Appears on Folder Key Display the Jam Position ScreenTouch Guide Touch Reserve to continue the reserve job setting When JAM Appears on Folder Key Check the empty tray, then supply that tray with paper Display the Basic Screen for the print job in progress Wait until the current operation is completed ActionCheck the original pages, then position originals again Press Start to complete the job When Memory Full Message Is Displayed Memory Overflow Press Start to continue copyingFollowing message displays Wait about 10 seconds Turn on the power switch When Power OFF/ON Screen Is Displayed Copy Image is TOO Light Troubleshooting Tips Copy Quality is Poor Troubleshooting Tips Please Check Original Troubleshooting TipsPage Main Body & Option Specifications Machine Specifications Main Body Specifications Main Body Specifications Main Body Specifications Option Specifications Page Advanced Page Advanced Information How to Use Advanced Functions Programmed Shut-Off Weekly Timer Press the power switchEnter the password Programmed Shut-Off Weekly Timer Set the duration for the interrupt usePress Start Set the minute for the interrupt use Rotation Touch Auto to deselect it Rotation Vertical/Horizontal Zoom Mode Specifications Vertical/Horizontal Zoom Mode Vertical/Horizontal Zoom Mode Details Applications How to Use Application Functions Touch OK on the Application Selection Screen To Display Application Selection Screen Inserting Sheets and Covers Sheet/Cover Insertion Specifications for Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Select the desired cover mode Select the desired insertion modeSelect the cover sheet tray source Enter the page number Details Entering Page Numbers Inserting Sheets and Covers Sheet/Cover Insertion Positioning Title Pages on the Right Side Chapter Specifications for Chapter When all entries are made, touch OK Positioning Title Pages on the Right Side ChapterTouch Chapter on the Application Selection Screen Positioning Title Pages on the Right Side Chapter Lay Out Several Pages onto One Sheet Combination Specifications for Combination Select the desired Combination mode Lay Out Several Pages onto One Sheet CombinationTouch Combination on the Application Selection Screen Original Portrait type Landscape type Details Original Type and Layout Order Making a Multiple Page Signature Booklet Booklet Specifications for Booklet Select the 1a2 or 2a2 copy mode and the desired paper size Touch to highlight the desired Booklet mode key Touch OKMaking a Multiple Page Signature Booklet Booklet Touch Booklet on the Application Selection Screen Position originals Face UP in the document feeder Copying onto Transparent Films Transparency Specifications for Transparency Copying onto Transparent Films Transparency For details on positioning originals, see p -2 to p Inserting Images into Printed Sets Image Insert Specifications for Image Insert Inserting Images into Printed Sets Image Insert Touch Image Insert on the Application Selection ScreenUse the control panel keypad to enter the page number Touch Scan on the Basic Screen Inserting Images into Printed Sets Image InsertScan the platen glass images Touch Scan Dividing an Image into Right and Left Pages Book Copy Specifications for Book Copy Select the desired Book Copy mode Dividing an Image into Right and Left Pages Book CopyTouch Book Copy on the Application Selection Screen Select the desired copy mode and magnification Scanning Original for Cover Dividing an Image into Right and Left Pages Book Copy Copying Mixed Size Originals Mixed Original Specifications for Mixed Original Touch Special Original on the Application Selection Screen Copying Mixed Size Originals Mixed Original Position mixed originals Face UP in the document feeder Copying Mixed Size Originals Mixed Original Copying Folded Originals Folded Original Specifications for Folded Original Position folded originals Face UP in the document feeder Copying Folded Originals Folded Original Copying Folded Originals Folded Original Copying Non-Standard Size Originals Non-Standard Size Specifications for Non-Standard Size Touch Non-standard Size Copying Non-Standard Size Originals Non-Standard Size Specifications for Upside Down Reverse the Second Side in 1-2 Mode Upside Down Touch 1-2 Upside down or 2-1 Upside down Reverse the Second Side in 1-2 Mode Upside DownPage Photo Mode Text ModeIncrease Contrast Mode Specifications for Text/Photo Enhance Touch OK to return to the Application Selection Screen Making Copy Quality Closer to Originals Text/Photo Enhance Reverse Image Repeat Reversing Color in Black and White Image Reverse Image Specifications for Reverse Image Reversing Color in Black and White Image Reverse Image Touch Reverse Image on the Application Selection ScreenTouch OK on the Application Selection Screen Vertical/Horizontal Width Setting Mode Specifications Repeating Selected Image Area Repeat Verti./Horiz. Mode Touch Repeat on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Select the desired magnification and copy size Repeating Selected Image Area Repeat Verti./Horiz. Mode Repeat mode Auto Detection/ Repeat Mode Specifications Touch Auto or Repeat, as desired Touch to highlight the desired mode key Position original Copying Specifications for Frame/Fold Erasure Frame/Fold Erasure Selection Screen will be displayed Touch OK Copying Image in the Center of Copy Paper Auto Layout Specifications for Auto Layout Touch Auto Layout on the Application Selection Screen Details Specifications for Image Shift Adjusting Position of Copy Image Image Shift Adjusting Position of Copy Image Image Shift Touch Image Shift on the Application Selection ScreenTouch Image Shift, then specify the shift amount Adjusting Position of Copy Image Image Shift Reducing Images to Create Binding Margin Reduce&Shift Specifications for Reduce & Shift Touch Reduce & Shift, then specify the shift amount Reducing Images to Create Binding Margin Reduce&Shift Touch OK Erasing Outside of the Original Non-Image Area Erase Specifications for Non-Image Area Erase Select magnification and copy size, as desired Erasing Outside of the Original Non-Image Area Erase Details Oblique Erase and Rectangle Erase Modes Erasing Outside of the Original Non-Image Area Erase Printing Stamp, Page, Watermark onto Copies Stamp Specification for Stamp Printing Stamp, Page, Watermark onto Copies Stamp Touch Stamp on the Application Selection ScreenTouch to select the desired key Printing Stamp, Page, Watermark onto Copies Stamp Touch OK Details Print Position Selection Screen Overlaying an Image onto Each Page Copied in the Job Overlay Specification for Overlay Touch Overlay Touch OK on the Stamp/Overlay Selection Screen Touch STAMP/OVERLAY on the Application Selection Screen Position the originals to be overlaid Page Paper and Original Paper Information Paper Weight Tray/ Exit Tray Capacity Paper Information Paper Size Paper Information To Store Copy Paper Special Paper in Multi-Sheet Bypass Tray Original Information Platen Glass Original SpecificationsPlaten Glass Originals Unsuitable Radf Originals Mixed Original mode Normal modeOriginal Information Radf Originals Original Information Folded Original mode How to Maintain the Copier Maintenance & Supplies Adding Toner Adding Toner 10-4 Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher 10-8 Cleaning the Document Glass and Cover Cleaning Image Scanning Section Cleaning the Radf Cleaning Image Scanning SectionCleaning the Left Partition Glass Cleaning the Radf Platen Guide Cover Cleaning the Radf Roller Cleaning the Writing Unit Glass and the Electrode Wires Cleaning Image Printing Section Cleaning Image Printing Section Press Counter on the control panel Checking Copy Count Service Maintenance, Repairs, SuppliesRepairs SuppliesPage Machine Settings How to Monitor Copier Activity and Modify To Display the Key Operator Mode Screen How to Access the Key Operator Mode Touch Return to exit the Key Operator mode How to Access the Key Operator Mode Time System Initial System Initial Language Copier Initial Initial Setting Copier Initial Copy Mode Density Magnification Tray Copier Initial Machine with Finisher OutputMachine with Inner Tray Machine without Finisher Machine with Inner tray Touch Oblique erase or Rectangular erase, as desired Non-Image Erase Preset Key Preset Key Preset Key C.M. Electronic Copy Monitor C.M. Electronic Copy Monitor How to Access the ECM Setting Mode Change ECM Data C.M. Electronic Copy Monitor ECM Data List C.M. Electronic Copy Monitor Reset the count for all ECM password Nos All Counter Reset 11-25 ECM On/Off Setting Copy Limit Reached Effect Lock Job Memory Paper Type Panel Contrast Key Operator Data Weekly Timer How to Access the Weekly Timer Setting Mode Weekly Timer Weekly Timer Setting Weekly Timer Copier ON/OFF Time Set Weekly Timer Machine Working Day Individual Set Weekly Timer Touch off-time Lunch Hour Off Function Password Setting Touch Panel Adjustment 11-41 Power Save SW No Setting default is underlined Memory Switch Memory Switch Auto Reset effect Auto reset timerAuto tray switch Load Radf effect Memory Switch Power save key No-printing timer20 5.5x8.5 orig. type 22 1 Shot indication time List Print Application Customize Density Shift Setting options Density shift 0/ 1/ 2/ 3 standard/ 4 Krds Host Index Page Number Symbol Index Iii Index Page August