[10] Touch Panel Adjustment

Use this feature to check malfunctions of the LCD touch screen due to the shift in position of the touch sensor.

When the Control Panel Adjustment Screen does not display in step 2, press one from the control panel keypad [0] ~ [9].

Key Operator Mode Screen

Touch Panel Adjustment Screen

Procedure

1Touch [10] Touch panel adj. on the Key Operator Mode Screen to display the Touch Panel Adjustment Screen.

2Touch the “+” indication at the upper right corner, then lower left corner on the screen. The present coordinates will be displayed in the message area of the screen.

NOTE:

When touching the “+” indications, it is recommended that you use a sharp point such as a pencil to be more accurate.

3Check that the X coordinate and Y coordinate displayed in the first line of the message area fall within the standard value displayed in the second line.

4Touch the CHECKs at the upper left and lower right corners on the screen to check if the buzzer tone functions normally.

5If the coordinates fall out of the range of the standard value in step 3, or the buzzer tone does not sound in step 4, repeat the adjustment procedure from 2 to 4.

6Press [START] on the control panel to complete the setting.

11-40

Page 276
Image 276
Konica Minolta 7135, 7130 manual Touch Panel Adjustment