Konica Minolta 7135, 7130 manual Interrupt Copying

Interrupt Copying (continued)

DETAILS

For particular jobs in progress, copying will cease only after certain phases of the immediate operation are completed, as indicated by the [INTER- RUPT] LED conditions described below.

•Collectively printing image stored in memory

The LED blinks until one set of the current job is printed.

Then the LED remains steady for the temporary job performed in Interrupt mode.

•Scanning originals into memory

The LED blinks until scanning is completed for all originals placed in the document feeder.

Then, the LED remains steady for the temporary job performed in Interrupt mode.

•Scanning originals into memory while printing in Reserve mode

The LED blinks until the copier completes the current printing job, scans all originals placed on the document feeder, and prints one set of the Reserved job.

The LED remains steady for the temporary job performed in Interrupt mode.

3-46