Konica Minolta 7130, 7135 manual C.M. Electronic Copy Monitor

[4]E.C.M. (Electronic Copy Monitor) (continued)

(3)Touch DEL. to delete the input character from the last.

(4)Touching CANCEL on the Name Input Screen will clear all the input characters.

(5)To change the existing name, touch DEL. to delete it and enter the new name.

6Touch OK on the Name Input Screen to return to the ECM Data Input Screen.

7Touch Limit. Limit key will be highlighted, enabling you to immediately enter copy limit.

8Enter a 6-digit copy limit for the ID No. using the keypad on the control panel. The input copy limit will be displayed on the right of the copy count.

NOTES:

1.If an invalid copy limit is entered, continue by entering the valid 6-digit copy limit.

2.Entering “000000” signifies no copy limit.

3.The Clear key, though it clears copy count, does not function on the ECM Data Input Screen.

9Touch OK to complete the settings and return to the ECM Setting Menu Screen.

When the same ECM password has been used for another ID No., the Password Duplication Screen will be displayed. To re-enter new password, touch YES and return to the step 5. To create duplicate password, touch NO, then touch OK.

NOTE:

It is possible to assign the same ECM password to different ID Numbers. Note, however, that the number of copies will be counted only for the ECM

password with the smallest ID No. Copy count for the other ID Numbers will not be monitored.

We recommend you do not use duplicate ECM password.

10If other ECM setting changes are required, touch the desired key.

11Touch RETURN to restore the Key Operator Mode Screen.

12If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-2111 Key Operator Mode