Positioning Originals (continued)

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in otherwise poor condition.

1. Raise the document feeder (or platen cover).

Place original FACE DOWN in the left rear corner, aligning the edge with the left measuring guide.

3

Copying Operations

Positioning

Originals

Setting Print

Quantity

Copy Size

Lens Mode

Density

2. Gently close the document feeder (or platen cover) to prevent the original from shifting on the glass.

Reminder!

When selecting Book Copy, Non-Image Area Erase, AUTO mode in Repeat, or AUTO Layout, DO NOT CLOSE the document feeder. For details on each function, see Section 8.

1-1, 2-2

2-1

Using

Memory

Output without

Finisher

FS-107

Output Modes

IT-101

Output Modes

Check Mode

&Proof Copy

Interrupt

Mode

3-5

Page 55
Image 55
Konica Minolta 7130, 7135 manual Positioning Original on Platen Glass, Raise the document feeder or platen cover