Konica Minolta 7130, 7135 Density Shift, Setting options Density shift 0/ 1/ 2/ 3 standard/ 4

[15] Density Shift

Density shift divides each of nine density levels into two levels of lighter and three levels of darker when used in combination with Text/Photo Enhance.

Density shift selection can be made in each of four Text/Photo Enhance modes; Text/ Photo (general), Text, Photo, and Increase Contrast.

❒ Setting options: Density shift 0/ 1/ 2/ 3 (standard)/ 4/ 5

Density shift 0

Density shift 1

Density shift 2

Density shift 3

Density shift 4

Density shift 5

Key Operator Mode Screen Density Shift Setting Screen

Procedure

1Touch [15] Density Shift to display the Density Shift Setting Screen.

2Select the Text/Photo Enhance mode.

Touch Text/Photo, TEXT, PHOTO, or Increase contrast to highlight it, then enter the desired density shift (from 0 to 5) using the Control panel keypad.

3Touch OK to complete the settings and return to the Key Operator Mode Screen.

4If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-4911 Key Operator Mode