Konica Minolta 7135, 7130 manual Copy Limit Reached Effect

[4]E.C.M. (Electronic Copy Monitor) (continued)

[5]Copy Limit Reached Effect

Use this function to select whether the copier will stop when the count limit is reached, or if the copier will complete the copy job before stopping when reaching maximum copy count.

❒Setting options: Immediately, After job, Warning

❒Default setting: After job

ECM Setting Menu Screen Copy Limit Reached Effect Screen

Procedure

1Touch 5. Copy Limit Reached effect on the ECM Setting Menu Screen to display the Copy Limit Reached Effect Screen.

2Select setting option:

Touch Immediately to stop the copier when the copy limit is reached.

In this case, the paper in process will be completed, and the message “Enter ECM password” will display after the copier stops.

Touch After job to stop the copier after the current job is completed.

Touch Warning only to display a warning message when copy limit is reached.

3Touch OK to complete the settings and return to the ECM Setting Menu Screen. If other ECM setting changes are required, touch the desired key.

4Touch RETURN to restore the Key Operator Mode Screen. If other key operator settings are required, touch the desired key.

5If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

11-26