Konica Minolta 7130, 7135 manual C.M. Electronic Copy Monitor

[4] E.C.M. (Electronic Copy Monitor) (continued)

3To add the ECM data, touch ADD. The ECM Data Input Screen with invalid Clear key will be displayed. To input the ECM data, see p. 11-20 to p. 11-21.

4To edit the ECM data, touch the c Upper arrow or d Lower arrow key on the right in the ECM Data List Screen to highlight the ECM data to be edited, then touch EDIT. The ECM Data Edit Screen with valid Clear key will be displayed.

(1)To edit the ECM password, touch Password. Enter a new 5-digit ECM password using the keypad on the control panel. Do not enter “00000”.

(2)To edit the name, touch Name. The Name Input Screen will be displayed. See p. 11-21.

(3)To edit the copy limit, touch Limit. Enter a

new 6-digit copy limit using the keypad on the control panel. Entering “000000” signifies no copy limit.

(4)To clear the copy count, touch Clear.

5Touch OK on the ECM Data Input Screen or the ECM Data Edit Screen to complete the settings and return to the ECM Data List Screen.

To cancel the changes made in step 3 or 4, touch RETURN to restore the ECM Data List Screen.

6Touch RETURN on the ECM Data List Screen to restore the ECM Setting Menu Screen. If other ECM setting changes are required, touch the desired key.

7Touch RETURN to restore the Key Operator Mode Screen.

8If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-2311 Key Operator Mode