[12] Memory Switch (continued)

[9] ATS/APS (Bypass)

This setting activates ATS and APS (platen and RADF) for Multi-sheet bypass.

[10] ATS/APS SW (Tray 1)

This setting activates ATS and APS (platen and RADF) for Tray 1.

[11] ATS/APS SW (Tray 2)

This setting activates ATS and APS (platen and RADF) for Tray 2.

[12] ATS/APS SW (Tray 3)

This setting activates ATS and APS (platen and RADF) for Tray 3.

[13] ATS/APS SW (Tray 4)

This setting activates ATS and APS (platen and RADF) for Tray 4.

[14] Platen AMS

This feature allows the machine to automatically select the proper magnification ratio when copy paper size is selected manually and an original is placed on the platen glass.

[15] RADF AMS

This feature allows the machine to automatically select the proper magnification ratio when copy paper size is selected manually and an original is fed from the RADF.

[16] Staple mode reset

When copying in the sort/staple mode, this setting allows the machine to automatically reset to non-staple mode when the job in progress is completed.

[17] Key click sound

When this feature is Low or High, the machine activates a buzzer sound when the touch sensitive screen is touched or any key is pressed. This confirms the machine recognition of the selection.

[18] Job memory recall

This feature allows the machine to initialize using selections stored in job memory No.15 when the power is turned on or the [AUTO RESET] key is pressed.

NOTE:

This function works only when job memory No.15 is registered.

[19] Sheet insertion

This setting allows selection of tray 1, tray 2, tray 3, tray 4, or Bypass as the source of the inserted sheets.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-4511 Key Operator Mode

Page 281
Image 281
Konica Minolta 7130, 7135 manual Memory Switch