Konica Minolta 7130, 7135 manual Troubleshooting Tips, Copy Image is TOO Light

Troubleshooting Tips

COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fully insert paper trays.

Close RADF.

Check to be sure main power switch is ON.

Check to be sure power plug is firmly inserted in electrical socket.

COPY IMAGE IS TOO LIGHT

Manually adjust copy density to darker density. Check toner indicator and add toner, if required.

Check paper for dampness. Do not leave paper in copier when humidity is high. Check to see if Photo, Text, or Increase Contrast mode is required.

Check the Density shift.

COPY IMAGE IS TOO DARK

Manually adjust copy density to lighter density.

Check to see if Photo, Text, or Increase Contrast mode is required. Check the Density shift.

COPY IMAGE IS NOT CLEAN OR SHOWS SPOTS Use clean originals since dirt marks may be copied.

Keep platen glass and inner surface of document cover clean.

Call for service if “Call for service” is displayed in the message area. Check density indicator and lighten if required.

COPY PAPER MISHANDLES DURING COPYING

Fan copy paper and load it with curl side in proper location. Do not exceed the tray capacity.

COPY IMAGE CAN BE RUBBED OFF

Check copy paper thickness. Use Thick paper mode, if paper weight requires it.

MAGNIFICATION CANNOT BE CHANGED

Image Shift and Reduce & Shift are incompatible with magnification.

Press [AUTO RESET] and set desired copying conditions without using Image Shift or Reduce & Shift.

THE TOUCH SCREEN COPY SIZE INDICATOR DISPLAYS [!] ON THE TRAY

The [!] symbol indicates that the paper loaded in the tray is inconsistent with the tray position setting.

DUPLEX MODES CANNOT BE SELECTED

Fully close ADU and RADF, then select Duplex mode again.

COPYING DOES NOT BEGIN AFTER PRESSING [START] Insert or adjust the appropriate paper tray for copy size selected. Close document cover firmly.

Close front door completely.

5-13

5

Trouble- shooting

Call for

Service

Preventive

Maintenance

Clearing

Mishandled

Paper

JAM Key

ADD PAPER

Key

Memory

Overflow

Power OFF/ON

Screen

Troubleshooting

Tips