Konica Minolta 7130, 7135 manual When Memory Full Message Is Displayed Memory Overflow

When “Memory Full” Message Is Displayed (Memory Overflow) (continued)

Action 2

Action 2 is required when a job ceases with Memory Overflow messages displayed. In this case, the scanned data still remains in memory.

Action 2 enables you to continue the job or suspend the job.

1. Wait until the current operation is completed.

The machine stops copying after producing one copied set irrespective of the set print quantity. When scanning in Store mode, however, the machine stops without producing a copied set.

At this time, all the data still remains in memory, and the following Memory Overflow message is displayed on the touch screen.

-Memory full-Start=>START key Cancel=>ST/CL key

2. Press [START] to continue copying.

The machine will output the scanned data for job completion in the amount remaining in the print quantity setting.

DETAILS

To suspend the job, press [STOP/CLEAR] to save the job settings. All scanned data will be erased.

Or, press [AUTO RESET] to clear the job and resume initial settings.

3. The following message displays.

If continuous working check output after copying

All the data in memory will be erased with this message displayed.

4. Check the original pages, then press [START] to complete the job.

Check pages of the output set to confirm the amount of missing data, then complete the job according to the print quantity remaining.

5

Trouble- shooting

Call for

Service

Preventive

Maintenance

Clearing

Mishandled

Paper

JAM Key

ADD PAPER

Key

Memory

Overflow

Power OFF/ON

Screen

Troubleshooting

Tips

5-11