Konica Minolta 7135 Programmed Shut-Off Weekly Timer, Press the power switch, Enter the password

Programmed Shut-Off (Weekly Timer)

The Weekly Timer function turns a copier on and off at the time specified by the Key Operator.

This function is not factory-set. When a copier is under control of the Weekly Timer function, the Timer Interrupt mode message will be displayed after pressing the power switch, and copying is unavailable.

However, copying can be available by using the following procedure.

1. Press the power switch.

HINT

For details of the Weekly Timer function, see p. 11-31 to p. 11-39.

The Basic screen will be displayed along with the message shown below.

Timer interrupt mode

Enter password

DETAILS

The machine power will be turned off automatically after 5 minutes from this state if a password is not entered.

The Timer Interrupt password is not factory set and must be entered by the Key Operator.

In the event the Timer Interrupt password has not been entered by the Key Operator, the following message will display instead.

Input copy time

0 hour(s) 05 minute(s)

When the above message displays, proceed to step 4.

2. Enter the password.

Enter a 4-digit number Timer Interrupt password using the keypad on the control panel.

7-2