Konica Minolta 7135, 7130 manual Requirements for Safe Use, Environment

Requirements for Safe Use (continued)

Environment

CAUTION: Prevention of Fire

Do not install near flammable materials, curtains or volatile combustibles, that can catch or cause fire.

CAUTION: Prevention of Short Circuit

Do not install the copier where it could be splashed with rain water, or water from a tap, to avoid a short circuit.

CAUTION: Temperature and Humidity

• Keep away from direct sunlight, heat sources such as stoves, cool air from an air conditioner and hot air from a heater.

• Avoid any environment that is outside the range shown below:

50 to 86°F (10 to 30°C) in temperature

10 to 80% in humidity

CAUTION: Ventilation

•Install the machine in a well-ventilated place.

•Keep away from dust or corrosive gases. These materials may cause poor image quality.

•During use, the machine generates ozone in an insufficient amount to cause any hazard to the human body.

However, if the machine is used in a poorly ventilated room, many copies are made, or more than one copier is used at the same time, an odor may be detected. Ensure adequate ventilation for a comfortable working environment.

CAUTION: Vibration

Do not install on a floor which is subject to vibration or is not level.

CAUTION: Transportation

Be sure to contact your service representative when moving or transporting the machine. If you move the machine Memory unit installed, machine trouble may be caused by vibration.

1-6