Konica Minolta 7130, 7135 manual Preset Key, Magnification

[3] Preset Key (continued)

[2] Magnification

The preset and userset ratios are used to reduce and enlarge the original image to accommodate copy paper size, and are available on the Basic Screen.

NOTE:

Normally, users are allowed to change the three USERSETs in the bottom line on the Userset Magnification Setting Screen. The preset keys in the top and middle lines can also be programmed in 2-5 DIPSW mode; however, changing them is not recommended.

❒Setting options:Userset or Preset ratio

❒Default setting: USERSET1: 4.00 USERSET2: 2.00 USERSET3: 0.50

Preset Key Setting Menu Screen Userset Magnification Setting Screen

Procedure

1Touch [3] Preset key on the Key Operator Mode Screen to display the Preset Key Setting Menu Screen.

2Touch [3] Magnification to display the Userset Magnification Setting Screen.

3Touch the USERSET you want to change, then enter a ratio from 0.25~4.00, using the keypad.

If a ratio under 0.25 is entered, 0.25 will be displayed. If a ratio over 4.00 is entered, 4.00 will be displayed.

4Touch OK to complete the setting and return to the Preset Key Setting Menu Screen.

5Touch RETURN to restore the Key Operator Mode Screen.

6If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-1711 Key Operator Mode