Konica Minolta 7135, 7130 manual Magnification

[2] Copier Initial (continued)

[3] Magnification

Set the magnification ratio you initially want to display after the user turns the power on or after Auto/Reset restores the Initial settings.

NOTICE:

This setting should not conflict with the Initial setting for Paper Tray. For example, if APS is selected for the initial paper tray setting, a ratio setting other than AMS will be ignored.

❒Setting options: AMS; 1.00; ratio 0.25~4.00

Key Operator Mode Screen Copier Initial Setting Screen

Magnification Initial Setting Screen

Procedure

1Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3. Magnification to display the Magnification Initial Setting Screen.

The default setting is 1.00.

2Select the desired setting from the Magnification Initial Setting Screen: To select 1.00 if it is not already displayed, touch 1.00.

To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter a 3-digit ratio using the keypad on the Control panel.

To select AMS, touch AMS.

11-10