Konica Minolta 7135, 7130 manual C.M. Electronic Copy Monitor

[4] E.C.M. (Electronic Copy Monitor)

This function can only be accessed by the Key Operator after a 8-digit ECM master key code is entered. The Electronic Copy Monitor allows you to monitor all copying activity by controlling ECM password accounts.

This feature can track copier usage for individual users and/or accounts as well as limit access to the copier to authorized users. Copy quantity limits for specific accounts can also be set. Use the ECM Key Operator Form provided at the end of this section to record ECM password information.

The ECM stores up to 128 ECM passwords, each of which represents a separate account that can be used for billing and recordkeeping. The number of users assigned to each account may depend upon the billing system in operation and the number of individuals and departments using the copier. When the ECM is activated, copying can be performed only after a valid ECM password is entered.

Copy quantity and copy limit for each account can be visually confirmed on the screen.

If ECM needs to be activated on your machine, contact your service representative.

The following ECM settings can be made:

1. Change E.C.M. Data:

Create up to 128 individual ECM passwords, 00000~99999, and limit copy counts for each password to a max. 999,999 copies.

2. E.C.M. Data List:

Display the copy count for each ECM password, and change limit settings.

3. All Counter Reset:

Clear the copy count for all passwords.

4. ECM On/Off Setting:

Select the function to be on or off. The initial setting is Off.

5. Copy Limit Reached Effect:

Set the machine condition when the copy limit is reached. The machine can be set to stop immediately or after a job is completed, or to only display a warning message.

11-18