Konica Minolta 7135 Enter the page number, Position originals Face UP in the document feeder

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)

7. Enter the page number.

Use the control panel keypad to enter the page number of insertion location. Touch SET after each entry to move to the next key.

To clear an incorrect entry, touch DELETE or press [# (CLEAR QTY.)]. The insertion location will be deleted.

HINT

See p. 8-7 for details on entering page numbers.

Touch OK to complete the page setting and return to the Sheet/Cover Insertion Screen.

8. When all settings are completed, touch OK to return to the Application Selection Screen.

The Basic Screen will be restored.

9. Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

10. Position originals FACE UP in the document feeder.

HINTS

•For details on positioning originals, see p. 3-2.

•Use RADF store mode (p. 3-24 to p. 3-26) when the original count exceeds 50.

11.Press [START].

CAUTION

When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.

8-6