Konica Minolta 7130 Programmed Shut-Off Weekly Timer, Set the duration for the interrupt use

Programmed Shut-Off (Weekly Timer) (continued)

HINT

For setting the Timer Interrupt password, see p. 11-39.

DETAILS

If an invalid password is entered, continue by entering the valid 4-digit password.

3. Press [START].

The following message will be displayed on the Basic Screen.

Input copy time

0 hour(s) 05 minute(s)

4. Set the duration for the interrupt use.

Enter a 1-digit hour (ex. 3 hours is 3) using the keypad on the control panel. (0 ~ 9)

5. Press [START].

6. Set the minute for the interrupt use.

Enter a 2-digit minute (ex. 7 minutes is 07) using the keypad on the control panel. (00 ~ 59)

DETAILS

Entering a number smaller than 5 will set the minute at 5.

7. Press [START].

Copying is available until the set time is up.

8. When Timer Interrupt of the copier is finished, press [POWER SAVER ON/OFF] for one second or longer, then release it.

The copier returns to the OFF condition and copying is again disabled.

Weekly

Timer

Rotation

Vertical/Hori- zontal Zoom

7

Advanced Information

7-3