Konica Minolta 7130, 7135 manual Requirements for Safe Use, Power Source

Requirements for Safe Use

To ensure your safe use of the machine, you are required to observe the following precautions without fail for the machine’s power source and during installation and routine handling. Be sure to read and observe them.

1

Safety Information

Power Source

CAUTION: Plug Socket

•A socket is limited in capacity. Use only a power source with the correct rating for the machine; otherwise, hazardous situations such as smoking or overheating may occur.

•Avoid multiple connections in the same outlet. Do not use multiple outlet adaptors.

CAUTION: Power Plug and Cord

•Be sure to insert the power plug firmly into the power socket. Otherwise an accident may occur as a result of smoking or overheating. If the inserted power plug is loose in the socket, even after it has been positively inserted, disconnect the plug and contact your electrical contractor.

•For plug cable equipment, the outlet must be near the equipment and easily accessible.

•Do not bend or crush the power cord. If your copier power cord is bent or damaged in any way, contact your service representative immediately. Do not attempt to repair it yourself, and do not continue to operate the copier. A damaged power cord may result in overheating, short circuit, or fire.

•Do not bundle or coil the power cord of the copier. Otherwise an accident may occur as a result of overheating or fire.

CAUTION: Connecting Multiple Loads to One Outlet Prohibited

Never connect multiple loads to one outlet using a multi-outlet extension cord or branched socket. Otherwise an accident may occur as a result of overheating or fire.

CAUTION: Extension Cord

An extension cord must never be used with this machine.

1-5