Konica Minolta 7130, 7135 manual Press Start to print

The front side image of the double-sided copy will be scanned into memory.

Making Double-Sided Copies (1a2, 2a2) (continued)

5. Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

6. Touch SCAN on the Basic Screen.

7. Replace the original on the platen glass with the back side down, then touch SCAN.

DETAILS

Repeat this step until all originals are scanned.

Memory indicator on the upper right of the Basic Screen allows you to check the remaining memory.

To delete the scanned data without printing, press [STOP/CLEAR].

8. Press [START] to print.

All the data in memory will be output.

Press [STOP/CLEAR] to suspend the printing job.

CAUTION

When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.

3

Copying Operations

Positioning

Originals

Setting Print

Quantity

Copy Size

Lens Mode

Density

1-1, 2-2

2-1

Using

Memory

Output without

Finisher

FS-107

Output Modes

IT-101

Output Modes

Check Mode

&Proof Copy

Interrupt

Mode

3-21