Konica Minolta 7135, 7130 manual Interrupt Copying, Press Interrupt on the control panel

Interrupt Copying

Use the Interrupt mode to interrupt copying in progress to perform a simple job. When interrupt copying is completed, the settings for the initial job restore automatically and the Basic Screen displays.

Interrupt copying is available when the copier is performing the following operations:

•Continuously printing the image stored in memory

•Scanning the originals into memory

•Scanning the originals into memory while printing in Reserve mode

The Interrupt mode cannot be selected with the following copier conditions:

•The Basic Screen is not displayed.

•The Call for Service message displays or a paper misfeed occurs.

1. Press [INTERRUPT] on the control panel.

DATA
	SCANNER / PRINTER	FAX	COPY
HELP
1	2	3	POWER SAVER
			ON / OFF
CHECK			INTERRUPT
4	5	6
APPLICATION			STOP/CLEAR
7	8	9
OUTPUT
	0		START
AUTO RESET	CLEAR QTY.

The [INTERRUPT] LED turns on and the SETTING indicator on the Basic Screen changes to INTERRUPT.

HINT

The timing to enter the Interrupt mode varies according to the job in progress on the machine when [INTERRUPT] is pressed.

See the following page.

3-44