Konica Minolta 7135 Selecting Magnification Ratio Lens Mode, To Copy in 1.00 Magnification Mode

Selecting Magnification Ratio (Lens Mode)

When the copier is turned ON, the magnification ratio is set to 1.00 (100%) automatically on the Basic Screen.

Follow each procedure described in this section to select the desired magnification ratio.

To Copy in 1.00 Magnification Mode

Follow this procedure to make a 100% copy of the original image.

1. Close the RADF securely, then press [AUTO RESET].

The initial settings are restored. Check that APS indicates that the 1.00 magnification is selected.

HINT

The initial settings may be altered by the Key Operator. See p. 11-7 to p. 11-14.

2. Select additional copy conditions, as desired.

DETAILS

Specifying copy size will release 1.00 magnification and set -A-(AMS) automatically. In this case, touch 1.00 to highlight it again.

3. Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

4. Position original(s).

HINT

See p. 3-2 to p. 3-6 for details on positioning originals.

5. Press [START].

3-12