Konica Minolta 7135, 7130 manual Change ECM Data

[4]E.C.M. (Electronic Copy Monitor) (continued)

[1]Change ECM Data

Assign an ID No. for an individual or for a group, then create individual password(s) for each user. You can specify a name and limit count for each password.

❒ECM ID No.: ID No. from 000~127, designated by key operator.

❒ECM Password: Unique 5-digit numeric code programmed by key operator for user.

❒User Name: max. 24 characters

❒Copy Limit: 0 to 999,999 copies

ECM Setting Menu Screen ECM Data Input Screen

Procedure

1Touch 1. Change E.C.M. data on the ECM Setting Menu Screen to display the ECM Data Input Screen.

2ID No. key is highlighted, enabling you to immediately enter an ID No. Enter a 3-digit ID No. from 000~127 using the keypad on the control panel.

3Touch Password to highlight it. Enter a 5-digit ECM password using the keypad on the control panel.

NOTES:

1.Do not enter “00000”. The initial ECM password value is “00000”.

2.We recommend that you make a list of all ECM passwords and ID Nos.

4Touch Name to display the Name Input Screen. If you do not specify the name, proceed to step 7. This operation can be completed normally without the name specified.

5Input desired name according to the procedure below.

(1) Max. 24 characters can be entered.

(2) Use Upper arrow and Lower arrow keys on the Name Input Screen to input uppercase and lowercase letters and symbols.

11-20