Manuals / Konica Minolta / Computer Equipment / Printer

Konica Minolta 7130, 7135 manual Touch Auto Layout on the Application Selection Screen

Models: 7135 7130

1 294

Download 294 pages 32.32 Kb

Page 193

The Basic Screen will be restored.

Copying Image in the Center of Copy Paper (AUTO Layout) (continued)

2. Touch AUTO Layout on the Application Selection Screen.

The incompatible function keys will be dimmed to show inactivity.

DETAILS

•Non-Image Area Erase will be selected automatically.

•When using the Book Copy with this function, the original smaller than the selected copy size will be printed in the center of the copy paper without image division performed.

3.Touch OK on the Application Selection Screen.

4. Select the desired magnification and copy size on the Basic Screen.

DETAILS

•APS and AMS are automatically released, and 1.00 (100%) is selected as a magnification ratio.

•Copy mode is automatically set to 1a1. When selecting 1a2 mode, Platen store mode will function automatically.

5.Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

6. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass.

HINT

For details on positioning originals, see p. 3-2 to p. 3-6.

Reminder!

DO NOT close the RADF when Non-Image Area Erase is selected. Placing original obliquely on the platen glass may cause black copy marks.

8-55

Application

Selection Screen

Sheet/Cover

Insertion

Chapter

Combination

Booklet

Transparency

Image Insert

Book Copy

Mixed

Original

Folded

Original

Non-Standard

Size

Upside Down

Text/Photo

Enhance

Reverse

Image

Repeat

8

Applications

Frame/Fold

Erasure

AUTO

Layout

Image Shift

Reduce &

Shift

Non-Image Area Erase

Stamp

Overlay

Image 193

Konica Minolta 7130, 7135 manual Touch Auto Layout on the Application Selection Screen

Contents

7022/7130/7135 Workgroup Document System Page Konica 7022/7130/7135 Correspondence Safety Information ContentsBasic Machine InformationContents Machine Specifications TroubleshootingAdvanced Information AdvancedApplications Key Operator Mode Maintenance & SuppliesPaper and Original Information Index ContentsFeatures of the Konica 7022/7130/7135 Features of the Konica 7022/7130/7135 Output Mode for Machine with FS-107 Finisher Installed Lens Mode RE, ZoomOutput Mode for Machine with IT-101 Inner Tray Installed Job MemoryPaper Capacity Power SaverPlaten Memory Proof CopySheet/Cover Insertion Weekly TimerStamp StaplePage Safety Information BasicMachine Information Page Precautions for Installation and Use Safety InformationHigh Température ¡Temperatura Alta Temperature Élevée Reminder FCC Regulations RegulationsFDA Regulations Canadian Department of Communications RegulationsRequirements for Safe Use Power SourceEnvironment Requirements for Safe UseRequirements for Safe Use 21.7 550 17.7 22.8 19.7 450 580 500 26.1 60.0 Precautions for Routine Handling Requirements for Safe Use Requirements for Safe Use Page Power and Loading Paper Machine Configuration, Turning OnExternal Machine Items Machine ConfigurationMachine Configuration Transfer/Separator wire cleaning lever forms the copy image Machine ConfigurationInternal Machine Items Standard/Optional Equipment Machine ConfigurationCOUNT/SET Basic ScreenMachine Configuration Control Panel Layout To Turn On the Power Turning On the Power SwitchTurn on the main power switch Turn on the power switchBasic Screen will be displayed Turning On the Power SwitchTurn OFF the power switch To Turn Off the PowerTurn OFF the main power switch Shutting Off Automatically Auto Shut-Off Reducing the Power in Standby Mode Auto Low PowerShutting Off / Reducing the Power Manually Turning On the Power SwitchPower save mode will be activated Enter ECM password Entering an ECM Password ECMPress Start Start a copying jobLoading Paper in Main Body Trays and DB-210 Trays Loading PaperWithdraw the main body tray or DB-210 tray Stack paper with curl side up Loading PaperPush in the tray until it locks into place Withdraw the DB-410 tray Loading Paper in DB-410 TrayLoading Paper in Multi-Sheet Bypass Tray When copying is completed, close the Multi-sheet bypass trayWithdraw the tray for which the paper size will be changed Changing Paper Size of Main Body Trays and DB-210 TraysSet the size indication dial at the correct paper size Page Copying Operations How to Make a Basic CopyPositioning Originals Adjust paper guidesPositioning Originals in Radf Position originals Face UP in the document feeder trayPositioning Originals Positioning originals in Mixed original modeDocument feeder tray Positioning originals in Folded original mode Raise the document feeder or platen cover Positioning Original on Platen GlassPositioning Originals To Set Print Quantity Setting Print QuantityTo Change Print Quantity Enter the correct quantityTo Select Copy Size Automatically APS Selecting Copy SizePosition originals 11x17 Selecting Copy SizeTo Specify Desired Copy Size AMS Original Size AMS Table To Copy in 1.00 Magnification Mode Selecting Magnification Ratio Lens ModeClose the Radf securely, then press Auto Reset Select additional copy conditions, as desiredTo Copy in Fixed Magnification Mode RE Selecting Magnification Ratio Lens ModeSpecification for Fixed Magnification Mode Touch RE on the Basic ScreenSpecification for Zoom Mode To Copy in Zoom ModeTouch Zoom on the Basic Screen Touch OKCopying To Select Copy Density Selecting Density LevelSelecting Density Level Making Double-Sided Copies 1a2, 2a2 Using RadfFront Back FrontPosition originals Face UP in the document feeder Making Double-Sided Copies 1a2, 2a2Specification for Double-Sided Copying Using Platen Glass Using Platen GlassOpen the document feeder Position original Face Down on the platen glassPress Start to print Touch 2a1 on the Basic Screen to highlight it Front BackPress Start To Scan Originals into Memory Store Mode Copying Using MemorySpecification for Store Mode Make copying selections, as desiredTouch Store Mode to highlight it Copying Using MemoryTouch Scan on the Basic Screen to scan To Set Next Copying Job Reserve Specifications for ReservePress Start to start scanning/printing for the current job Touch Reserve to highlight itPress Start to start scanning for the reserve job To Check/Control Jobs in Progress Job List Screen Perform the desired setting on the screenTouch JOB List on the Basic Screen Touch OK on the Job List Screen Contents of Job List ScreenSpecification for Output Modes without Finisher Output Mode for Machine without FinisherSelect the desired output mode Output Mode for Machine without FinisherPress Output on the control panel Output without Finisher Output Mode for Machine with Finisher Specification for Output Modes with Finisher Output Mode for Machine with FinisherSelect the desired staple position Output Mode for Machine with FinisherIT-101 Output Modes Check Mode Proof Copy Interrupt Specification for Output Modes with Inner Tray Output Mode for Machine with Inner Tray IT-101Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Press Check on the control panel Specifications for Check Mode and Proof CopyChecking Feature Selections and Proof Copying Touch Exit or press Check to return to the Basic Screen Checking Feature Selections and Proof CopyingChange the print quantity, as required Press Interrupt on the control panel Interrupt CopyingInterrupt Copying When Interrupt copying is completed, press Interrupt againSet copy conditions, as desired Press Start to start the interrupt copyingInterrupt Copying How to Use Helpful Functions Job Memory & Help ModeStoring Job Conditions Job Memory Job Store Specifications for Job MemoryStoring Job Conditions Job Memory Job Store Review the settings on the Job Store Check ScreenTouch Entry Enter a job name Job Memory Help Mode Recalling Stored Job Settings Job Memory Job Recall If desired, touch JOB Check Recalling Stored Job Settings Job Memory Job RecallPosition originals, then press Start to print Return to the Basic Screen, then press Help To Display the Help Screen from Basic ScreenTouch the desired key to display specific information Touch Exit to return to the Basic Screen Displaying Screen for Operation Guide Help ModeDetails Help Menu Screen While in any screen other than the Basic Screen, press Help To Display Help Screen from Other ScreensTouch Exit How to Handle Machine Troubles TroubleshootingTurn OFF the power switch and main power switch When Call for Service Message Is DisplayedTurn OFF then on the power switch Preventive Maintenance Clearing Mishandled Paper Follow the procedure on the screen to remove misfed paperTouch Guide on the screen Clearing Mishandled Paper When completed, the Basic Screen will be restoredDisplay the Jam Position Screen When JAM Appears on Folder KeyTouch Guide Touch Reserve to continue the reserve job setting When JAM Appears on Folder KeyCheck the empty tray, then supply that tray with paper Display the Basic Screen for the print job in progressWait until the current operation is completed ActionCheck the original pages, then position originals again Press Start to complete the jobPress Start to continue copying When Memory Full Message Is Displayed Memory OverflowFollowing message displays Wait about 10 seconds Turn on the power switch When Power OFF/ON Screen Is DisplayedCopy Image is TOO Light Troubleshooting TipsCopy Quality is Poor Troubleshooting TipsPlease Check Original Troubleshooting TipsPage Main Body & Option Specifications Machine SpecificationsMain Body Specifications Main Body Specifications Main Body Specifications Option Specifications Page Advanced Page Advanced Information How to Use Advanced FunctionsPress the power switch Programmed Shut-Off Weekly TimerEnter the password Set the duration for the interrupt use Programmed Shut-Off Weekly TimerPress Start Set the minute for the interrupt use Rotation Touch Auto to deselect it RotationVertical/Horizontal Zoom Mode Specifications Vertical/Horizontal Zoom ModeVertical/Horizontal Zoom Mode Details Applications How to Use Application FunctionsTouch OK on the Application Selection Screen To Display Application Selection ScreenInserting Sheets and Covers Sheet/Cover Insertion Specifications for Sheet/Cover InsertionInserting Sheets and Covers Sheet/Cover Insertion Select the desired insertion mode Select the desired cover modeSelect the cover sheet tray source Enter the page number Details Entering Page Numbers Inserting Sheets and Covers Sheet/Cover InsertionPositioning Title Pages on the Right Side Chapter Specifications for ChapterPositioning Title Pages on the Right Side Chapter When all entries are made, touch OKTouch Chapter on the Application Selection Screen Positioning Title Pages on the Right Side Chapter Lay Out Several Pages onto One Sheet Combination Specifications for CombinationLay Out Several Pages onto One Sheet Combination Select the desired Combination modeTouch Combination on the Application Selection Screen Original Portrait type Landscape type Details Original Type and Layout OrderMaking a Multiple Page Signature Booklet Booklet Specifications for BookletSelect the 1a2 or 2a2 copy mode and the desired paper size Touch to highlight the desired Booklet mode key Touch OKMaking a Multiple Page Signature Booklet Booklet Touch Booklet on the Application Selection ScreenPosition originals Face UP in the document feeder Copying onto Transparent Films Transparency Specifications for TransparencyCopying onto Transparent Films Transparency For details on positioning originals, see p -2 to p Inserting Images into Printed Sets Image Insert Specifications for Image InsertTouch Image Insert on the Application Selection Screen Inserting Images into Printed Sets Image InsertUse the control panel keypad to enter the page number Touch Scan on the Basic Screen Inserting Images into Printed Sets Image InsertScan the platen glass images Touch ScanDividing an Image into Right and Left Pages Book Copy Specifications for Book CopyDividing an Image into Right and Left Pages Book Copy Select the desired Book Copy modeTouch Book Copy on the Application Selection Screen Select the desired copy mode and magnification Scanning Original for Cover Dividing an Image into Right and Left Pages Book Copy Copying Mixed Size Originals Mixed Original Specifications for Mixed OriginalTouch Special Original on the Application Selection Screen Copying Mixed Size Originals Mixed OriginalPosition mixed originals Face UP in the document feeder Copying Mixed Size Originals Mixed OriginalCopying Folded Originals Folded Original Specifications for Folded OriginalPosition folded originals Face UP in the document feeder Copying Folded Originals Folded OriginalCopying Folded Originals Folded Original Copying Non-Standard Size Originals Non-Standard Size Specifications for Non-Standard SizeTouch Non-standard Size Copying Non-Standard Size Originals Non-Standard SizeSpecifications for Upside Down Reverse the Second Side in 1-2 Mode Upside DownTouch 1-2 Upside down or 2-1 Upside down Reverse the Second Side in 1-2 Mode Upside DownPage Photo Mode Text ModeIncrease Contrast Mode Specifications for Text/Photo EnhanceTouch OK to return to the Application Selection Screen Making Copy Quality Closer to Originals Text/Photo EnhanceReverse Image Repeat Reversing Color in Black and White Image Reverse Image Specifications for Reverse ImageTouch Reverse Image on the Application Selection Screen Reversing Color in Black and White Image Reverse ImageTouch OK on the Application Selection Screen Vertical/Horizontal Width Setting Mode Specifications Repeating Selected Image Area Repeat Verti./Horiz. ModeTouch Repeat on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. ModeSelect the desired magnification and copy size Repeating Selected Image Area Repeat Verti./Horiz. ModeRepeat mode Auto Detection/ Repeat Mode SpecificationsTouch Auto or Repeat, as desired Touch to highlight the desired mode key Position original Copying Specifications for Frame/Fold ErasureFrame/Fold Erasure Selection Screen will be displayed Touch OK Copying Image in the Center of Copy Paper Auto Layout Specifications for Auto LayoutTouch Auto Layout on the Application Selection Screen Details Specifications for Image Shift Adjusting Position of Copy Image Image ShiftTouch Image Shift on the Application Selection Screen Adjusting Position of Copy Image Image ShiftTouch Image Shift, then specify the shift amount Adjusting Position of Copy Image Image Shift Reducing Images to Create Binding Margin Reduce&Shift Specifications for Reduce & ShiftTouch Reduce & Shift, then specify the shift amount Reducing Images to Create Binding Margin Reduce&ShiftTouch OK Erasing Outside of the Original Non-Image Area Erase Specifications for Non-Image Area EraseSelect magnification and copy size, as desired Erasing Outside of the Original Non-Image Area EraseDetails Oblique Erase and Rectangle Erase Modes Erasing Outside of the Original Non-Image Area ErasePrinting Stamp, Page, Watermark onto Copies Stamp Specification for StampTouch Stamp on the Application Selection Screen Printing Stamp, Page, Watermark onto Copies StampTouch to select the desired key Printing Stamp, Page, Watermark onto Copies Stamp Touch OK Details Print Position Selection Screen Overlaying an Image onto Each Page Copied in the Job Overlay Specification for OverlayTouch Overlay Touch OK on the Stamp/Overlay Selection Screen Touch STAMP/OVERLAY on the Application Selection ScreenPosition the originals to be overlaid Page Paper and Original Paper Information Paper WeightTray/ Exit Tray Capacity Paper InformationPaper Size Paper InformationTo Store Copy Paper Special Paper in Multi-Sheet Bypass TrayOriginal Information Platen Glass Original SpecificationsPlaten Glass Originals Unsuitable Radf OriginalsMixed Original mode Normal modeOriginal Information Radf OriginalsOriginal Information Folded Original modeHow to Maintain the Copier Maintenance & SuppliesAdding Toner Adding Toner 10-4 Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher 10-8 Cleaning the Document Glass and Cover Cleaning Image Scanning SectionCleaning the Radf Cleaning Image Scanning SectionCleaning the Left Partition Glass Cleaning the Radf Platen Guide CoverCleaning the Radf Roller Cleaning the Writing Unit Glass and the Electrode Wires Cleaning Image Printing SectionCleaning Image Printing Section Press Counter on the control panel Checking Copy CountService Maintenance, Repairs, SuppliesRepairs SuppliesPage Machine Settings How to Monitor Copier Activity and ModifyTo Display the Key Operator Mode Screen How to Access the Key Operator ModeTouch Return to exit the Key Operator mode How to Access the Key Operator ModeTime System InitialSystem Initial Language Copier Initial Initial SettingCopier Initial Copy ModeDensity Magnification Tray Copier InitialMachine with Finisher OutputMachine with Inner Tray Machine without FinisherMachine with Inner tray Touch Oblique erase or Rectangular erase, as desired Non-Image ErasePreset Key Preset Key Preset Key C.M. Electronic Copy Monitor C.M. Electronic Copy Monitor How to Access the ECM Setting ModeChange ECM Data C.M. Electronic Copy Monitor ECM Data List C.M. Electronic Copy Monitor Reset the count for all ECM password Nos All Counter Reset11-25 ECM On/Off SettingCopy Limit Reached Effect Lock Job Memory Paper Type Panel Contrast Key Operator Data Weekly Timer How to Access the Weekly Timer Setting Mode Weekly TimerWeekly Timer Setting Weekly Timer Copier ON/OFF Time Set Weekly Timer Machine Working Day Individual Set Weekly Timer Touch off-time Lunch Hour Off FunctionPassword Setting Touch Panel Adjustment 11-41 Power SaveSW No Setting default is underlined Memory SwitchMemory Switch Auto Reset effect Auto reset timerAuto tray switch Load Radf effectMemory Switch Power save key No-printing timer20 5.5x8.5 orig. type 22 1 Shot indication timeList Print Application Customize Density Shift Setting options Density shift 0/ 1/ 2/ 3 standard/ 4Krds Host Index Page Number SymbolIndex Iii Index Page August