Konica Minolta 7135, 7130 manual Entering an ECM Password ECM, Enter ECM password, Press Start

Turning On the Power Switch (continued)

Entering an ECM Password (ECM)

The Electronic Copy Monitor (ECM) allows the Key Operator to monitor all copying activities by controlling ECM password accounts. Copy quantity limits for specific accounts can be set.

The ECM is not factory-set. An ECM password is required only when the ECM is activated, a User Password is assigned, and “Enter E.C.M. password” is displayed on the touch screen.

Copying will be available by following procedure:

HINT

For details of the ECM setting, see p. 11-18 to p. 11-26.

1. Enter ECM password.

Enter your 8-digit ECM password, using the keypad.

HINT

For setting an ECM password, see p. 11-20 to p. 11-21.

DETAILS

If an invalid ECM password is entered, continue by entering the correct password.

2. Press [START].

Your current copy count and copy limit will be displayed for 3 sec.

Current count / limit 018888/025000

3. Start a copying job.

When the message changes to “Ready to copy,” copying job is available on the machine.

DETAILS

When your copy count reaches the copy limit, the message “Copy limit reached” will be displayed. In that case, contact the Key Operator to reset your copy limit.

4. Press [✽] while pressing [#].

The initial state will be restored, with the message “Enter E.C.M. password” displayed on the screen.

2-14