Konica Minolta 7130, 7135 manual Troubleshooting Tips, Please Check Original

Troubleshooting Tips (continued)

THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN USER’S MANUAL

Check with the Key Operator, as Initial Settings may have been changed.

“PLEASE CHECK ORIGINAL”

This message displays when the copier detects a non-standard paper size on the platen glass.

Select copy size and press [START]. 1.00 magnification will be selected automatically. If this message continues to display after selecting copy size, select 1.00 magnification, even if it is already indicated, then press [START].

If desired, ask your service representative to enable the machine to default to 1.00 magnification in this situation.

SHEET INSERTION RESULT IS NOT AS EXPECTED

Blank insertion: Be sure manuscript originals do not already include blank sheets in the locations designated for sheet insertion.

Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right hand side in the finished set, insertion sheets must be designated on the page setting screen with odd numbers, not even. If required, make an even numbered original page odd by inserting a blank sheet in front of that page, so that the blank sheet is even and the insertion sheet is odd.

COPIES SKEW IN THE STAPLED SETS

Check to see if copy paper is excessively curled in the tray.

Reload the copy paper upside down.

5

Trouble- shooting

Call for

Service

Preventive

Maintenance

Clearing

Mishandled

Paper

JAM Key

ADD PAPER

Key

Memory

Overflow

Power OFF/ON

Screen

Troubleshooting

Tips

5-15