Scanning Original for Cover | Konica Minolta 7135, 7130 guide

Dividing an Image into Right and Left Pages (Book Copy) (continued)

CAUTION

When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.

Scanning Original for Cover

Use platen glass for scanning original for cover.

1Open the document feeder.

2Position original for front cover FACE DOWN on the platen glass.

3Touch SCAN to start scanning.

4When Front/Back + Full scan is selected, scan original for back cover according to the above steps 2 and 3.

5Use platen glass or document feeder, as required, for scanning body text originals.

To output the set in the same order as the originals, start scanning from the first page.

6Touch SCAN to start scanning.

7Repeat steps 5 and 6 for subsequent originals.

“Front Cover + Full Scan”							9 10
					6	7 8	9 10
				2 3 4 5	6	7 8
SURVEYOR’S				2 3 4 5
REPORT	Scan from		SURVEYOR’S 1
	first page		REPORT
	first page
					Copies
“Front/Back + Full Scan”								2 3 4 5	6	7 8 9 10
									6
	SURVEYOR’S		Scan from
SURVEYOR’S	SURVEYOR’S						SURVEYOR’S	1
SURVEYOR’S	REPORT						SURVEYOR’S	1
REPORT			first page				REPORT
			first page
									Copies
“Front Cover + Full Scan”			2 3 4	5 6 7 8 9 10
			2 3 4
		SURVEYOR’S 1
			REPORT
				Copies
“Front/Back + Full Scan”								2 3 4	5 6 7 8 9 10
								2 3 4
SURVEYOR’S							SURVEYOR’S 1
SURVEYOR’S							REPORT
REPORT							REPORT
REPORT
								Copies

8-26

Image 164

Konica Minolta 7135, 7130 manual Scanning Original for Cover

Contents

7022/7130/7135 Workgroup Document System Page Konica 7022/7130/7135 Correspondence Contents Safety InformationBasic Machine Information Contents Troubleshooting Machine Specifications Applications AdvancedAdvanced Information Paper and Original Information Maintenance & SuppliesKey Operator Mode Contents Index Features of the Konica 7022/7130/7135 Features of the Konica 7022/7130/7135 Lens Mode RE, Zoom Output Mode for Machine with FS-107 Finisher InstalledOutput Mode for Machine with IT-101 Inner Tray Installed Job Memory Power Saver Paper CapacityPlaten Memory Proof Copy Weekly Timer Sheet/Cover InsertionStamp StaplePage Safety Information BasicMachine Information Page Safety Information Precautions for Installation and Use High Température ¡Temperatura Alta Temperature Élevée Reminder Regulations FCC RegulationsFDA Regulations Canadian Department of Communications Regulations Power Source Requirements for Safe Use Requirements for Safe Use Environment Requirements for Safe Use 21.7 550 17.7 22.8 19.7 450 580 500 26.1 60.0 Precautions for Routine Handling Requirements for Safe Use Requirements for Safe Use Page Machine Configuration, Turning On Power and Loading Paper Machine Configuration External Machine Items Machine Configuration Internal Machine Items Machine ConfigurationTransfer/Separator wire cleaning lever forms the copy image Machine Configuration Standard/Optional Equipment Basic Screen COUNT/SET Machine Configuration Control Panel Layout Turning On the Power Switch To Turn On the PowerTurn on the main power switch Turn on the power switch Turning On the Power Switch Basic Screen will be displayed Turn OFF the main power switch To Turn Off the PowerTurn OFF the power switch Reducing the Power in Standby Mode Auto Low Power Shutting Off Automatically Auto Shut-Off Power save mode will be activated Turning On the Power SwitchShutting Off / Reducing the Power Manually Entering an ECM Password ECM Enter ECM passwordPress Start Start a copying job Withdraw the main body tray or DB-210 tray Loading PaperLoading Paper in Main Body Trays and DB-210 Trays Push in the tray until it locks into place Loading PaperStack paper with curl side up Loading Paper in DB-410 Tray Withdraw the DB-410 tray When copying is completed, close the Multi-sheet bypass tray Loading Paper in Multi-Sheet Bypass Tray Set the size indication dial at the correct paper size Changing Paper Size of Main Body Trays and DB-210 TraysWithdraw the tray for which the paper size will be changed Page How to Make a Basic Copy Copying Operations Adjust paper guides Positioning OriginalsPositioning Originals in Radf Position originals Face UP in the document feeder tray Document feeder tray Positioning originals in Mixed original modePositioning Originals Positioning originals in Folded original mode Positioning Original on Platen Glass Raise the document feeder or platen cover Positioning Originals Setting Print Quantity To Set Print QuantityTo Change Print Quantity Enter the correct quantity Position originals Selecting Copy SizeTo Select Copy Size Automatically APS Selecting Copy Size 11x17 To Specify Desired Copy Size AMS Original Size AMS Table Selecting Magnification Ratio Lens Mode To Copy in 1.00 Magnification ModeClose the Radf securely, then press Auto Reset Select additional copy conditions, as desired Selecting Magnification Ratio Lens Mode To Copy in Fixed Magnification Mode RESpecification for Fixed Magnification Mode Touch RE on the Basic Screen To Copy in Zoom Mode Specification for Zoom ModeTouch Zoom on the Basic Screen Touch OK Copying Selecting Density Level To Select Copy Density Selecting Density Level Using Radf Making Double-Sided Copies 1a2, 2a2Front Back Front Making Double-Sided Copies 1a2, 2a2 Position originals Face UP in the document feeder Using Platen Glass Specification for Double-Sided Copying Using Platen GlassOpen the document feeder Position original Face Down on the platen glass Press Start to print Front Back Touch 2a1 on the Basic Screen to highlight it Press Start Copying Using Memory To Scan Originals into Memory Store ModeSpecification for Store Mode Make copying selections, as desired Copying Using Memory Touch Store Mode to highlight it Touch Scan on the Basic Screen to scan Specifications for Reserve To Set Next Copying Job ReservePress Start to start scanning/printing for the current job Touch Reserve to highlight it Press Start to start scanning for the reserve job Touch JOB List on the Basic Screen Perform the desired setting on the screenTo Check/Control Jobs in Progress Job List Screen Contents of Job List Screen Touch OK on the Job List Screen Output Mode for Machine without Finisher Specification for Output Modes without Finisher Press Output on the control panel Output Mode for Machine without FinisherSelect the desired output mode Output without Finisher Output Mode for Machine with Finisher Output Mode for Machine with Finisher Specification for Output Modes with Finisher Output Mode for Machine with Finisher Select the desired staple position IT-101 Output Modes Check Mode Proof Copy Interrupt Output Mode for Machine with Inner Tray IT-101 Specification for Output Modes with Inner Tray Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Specifications for Check Mode and Proof Copy Press Check on the control panel Checking Feature Selections and Proof Copying Change the print quantity, as required Checking Feature Selections and Proof CopyingTouch Exit or press Check to return to the Basic Screen Interrupt Copying Press Interrupt on the control panel When Interrupt copying is completed, press Interrupt again Interrupt CopyingSet copy conditions, as desired Press Start to start the interrupt copying Interrupt Copying Job Memory & Help Mode How to Use Helpful Functions Specifications for Job Memory Storing Job Conditions Job Memory Job Store Touch Entry Review the settings on the Job Store Check ScreenStoring Job Conditions Job Memory Job Store Enter a job name Job Memory Help Mode Recalling Stored Job Settings Job Memory Job Recall Position originals, then press Start to print Recalling Stored Job Settings Job Memory Job RecallIf desired, touch JOB Check Touch the desired key to display specific information To Display the Help Screen from Basic ScreenReturn to the Basic Screen, then press Help Details Help Menu Screen Displaying Screen for Operation Guide Help ModeTouch Exit to return to the Basic Screen Touch Exit To Display Help Screen from Other ScreensWhile in any screen other than the Basic Screen, press Help Troubleshooting How to Handle Machine Troubles When Call for Service Message Is Displayed Turn OFF the power switch and main power switch Turn OFF then on the power switch Preventive Maintenance Touch Guide on the screen Follow the procedure on the screen to remove misfed paperClearing Mishandled Paper When completed, the Basic Screen will be restored Clearing Mishandled Paper Touch Guide When JAM Appears on Folder KeyDisplay the Jam Position Screen When JAM Appears on Folder Key Touch Reserve to continue the reserve job setting Display the Basic Screen for the print job in progress Check the empty tray, then supply that tray with paper Action Wait until the current operation is completedCheck the original pages, then position originals again Press Start to complete the job Following message displays When Memory Full Message Is Displayed Memory OverflowPress Start to continue copying When Power OFF/ON Screen Is Displayed Wait about 10 seconds Turn on the power switch Troubleshooting Tips Copy Image is TOO Light Troubleshooting Tips Copy Quality is Poor Troubleshooting Tips Please Check OriginalPage Machine Specifications Main Body & Option Specifications Main Body Specifications Main Body Specifications Main Body Specifications Option Specifications Page Advanced Page How to Use Advanced Functions Advanced Information Enter the password Programmed Shut-Off Weekly TimerPress the power switch Press Start Set the minute for the interrupt use Programmed Shut-Off Weekly TimerSet the duration for the interrupt use Rotation Rotation Touch Auto to deselect it Vertical/Horizontal Zoom Mode Vertical/Horizontal Zoom Mode Specifications Vertical/Horizontal Zoom Mode Details How to Use Application Functions Applications To Display Application Selection Screen Touch OK on the Application Selection Screen Specifications for Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Select the cover sheet tray source Select the desired cover modeSelect the desired insertion mode Enter the page number Inserting Sheets and Covers Sheet/Cover Insertion Details Entering Page Numbers Specifications for Chapter Positioning Title Pages on the Right Side Chapter Touch Chapter on the Application Selection Screen When all entries are made, touch OKPositioning Title Pages on the Right Side Chapter Positioning Title Pages on the Right Side Chapter Specifications for Combination Lay Out Several Pages onto One Sheet Combination Touch Combination on the Application Selection Screen Select the desired Combination modeLay Out Several Pages onto One Sheet Combination Details Original Type and Layout Order Original Portrait type Landscape type Specifications for Booklet Making a Multiple Page Signature Booklet Booklet Touch to highlight the desired Booklet mode key Touch OK Select the 1a2 or 2a2 copy mode and the desired paper sizeMaking a Multiple Page Signature Booklet Booklet Touch Booklet on the Application Selection Screen Position originals Face UP in the document feeder Specifications for Transparency Copying onto Transparent Films Transparency Copying onto Transparent Films Transparency For details on positioning originals, see p -2 to p Specifications for Image Insert Inserting Images into Printed Sets Image Insert Use the control panel keypad to enter the page number Inserting Images into Printed Sets Image InsertTouch Image Insert on the Application Selection Screen Inserting Images into Printed Sets Image Insert Touch Scan on the Basic ScreenScan the platen glass images Touch Scan Specifications for Book Copy Dividing an Image into Right and Left Pages Book Copy Touch Book Copy on the Application Selection Screen Select the desired Book Copy modeDividing an Image into Right and Left Pages Book Copy Select the desired copy mode and magnification Scanning Original for Cover Dividing an Image into Right and Left Pages Book Copy Specifications for Mixed Original Copying Mixed Size Originals Mixed Original Copying Mixed Size Originals Mixed Original Touch Special Original on the Application Selection Screen Copying Mixed Size Originals Mixed Original Position mixed originals Face UP in the document feeder Specifications for Folded Original Copying Folded Originals Folded Original Copying Folded Originals Folded Original Position folded originals Face UP in the document feeder Copying Folded Originals Folded Original Specifications for Non-Standard Size Copying Non-Standard Size Originals Non-Standard Size Copying Non-Standard Size Originals Non-Standard Size Touch Non-standard Size Reverse the Second Side in 1-2 Mode Upside Down Specifications for Upside Down Reverse the Second Side in 1-2 Mode Upside Down Touch 1-2 Upside down or 2-1 Upside downPage Text Mode Photo ModeIncrease Contrast Mode Specifications for Text/Photo Enhance Making Copy Quality Closer to Originals Text/Photo Enhance Touch OK to return to the Application Selection Screen Reverse Image Repeat Specifications for Reverse Image Reversing Color in Black and White Image Reverse Image Touch OK on the Application Selection Screen Reversing Color in Black and White Image Reverse ImageTouch Reverse Image on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Vertical/Horizontal Width Setting Mode Specifications Repeating Selected Image Area Repeat Verti./Horiz. Mode Touch Repeat on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Select the desired magnification and copy size Auto Detection/ Repeat Mode Specifications Repeat mode Touch Auto or Repeat, as desired Touch to highlight the desired mode key Position original Specifications for Frame/Fold Erasure Copying Frame/Fold Erasure Selection Screen will be displayed Touch OK Specifications for Auto Layout Copying Image in the Center of Copy Paper Auto Layout Touch Auto Layout on the Application Selection Screen Details Adjusting Position of Copy Image Image Shift Specifications for Image Shift Touch Image Shift, then specify the shift amount Adjusting Position of Copy Image Image ShiftTouch Image Shift on the Application Selection Screen Adjusting Position of Copy Image Image Shift Specifications for Reduce & Shift Reducing Images to Create Binding Margin Reduce&Shift Reducing Images to Create Binding Margin Reduce&Shift Touch Reduce & Shift, then specify the shift amount Touch OK Specifications for Non-Image Area Erase Erasing Outside of the Original Non-Image Area Erase Erasing Outside of the Original Non-Image Area Erase Select magnification and copy size, as desired Erasing Outside of the Original Non-Image Area Erase Details Oblique Erase and Rectangle Erase Modes Specification for Stamp Printing Stamp, Page, Watermark onto Copies Stamp Touch to select the desired key Printing Stamp, Page, Watermark onto Copies StampTouch Stamp on the Application Selection Screen Printing Stamp, Page, Watermark onto Copies Stamp Touch OK Details Print Position Selection Screen Specification for Overlay Overlaying an Image onto Each Page Copied in the Job Overlay Touch STAMP/OVERLAY on the Application Selection Screen Touch Overlay Touch OK on the Stamp/Overlay Selection Screen Position the originals to be overlaid Page Paper and Original Paper Weight Paper Information Paper Information Tray/ Exit Tray Capacity Paper Information Paper Size Special Paper in Multi-Sheet Bypass Tray To Store Copy Paper Platen Glass Original Specifications Original InformationPlaten Glass Originals Unsuitable Radf Originals Normal mode Mixed Original modeOriginal Information Radf Originals Folded Original mode Original Information Maintenance & Supplies How to Maintain the Copier Adding Toner Adding Toner 10-4 Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher 10-8 Cleaning Image Scanning Section Cleaning the Document Glass and Cover Cleaning Image Scanning Section Cleaning the RadfCleaning the Left Partition Glass Cleaning the Radf Platen Guide Cover Cleaning the Radf Roller Cleaning Image Printing Section Cleaning the Writing Unit Glass and the Electrode Wires Cleaning Image Printing Section Checking Copy Count Press Counter on the control panel Maintenance, Repairs, Supplies ServiceRepairs SuppliesPage How to Monitor Copier Activity and Modify Machine Settings How to Access the Key Operator Mode To Display the Key Operator Mode Screen How to Access the Key Operator Mode Touch Return to exit the Key Operator mode System Initial Time System Initial Language Initial Setting Copier Initial Copy Mode Copier Initial Density Magnification Copier Initial Tray Output Machine with FinisherMachine with Inner Tray Machine without Finisher Machine with Inner tray Non-Image Erase Touch Oblique erase or Rectangular erase, as desired Preset Key Preset Key Preset Key C.M. Electronic Copy Monitor How to Access the ECM Setting Mode C.M. Electronic Copy Monitor Change ECM Data C.M. Electronic Copy Monitor ECM Data List C.M. Electronic Copy Monitor All Counter Reset Reset the count for all ECM password Nos ECM On/Off Setting 11-25 Copy Limit Reached Effect Lock Job Memory Paper Type Panel Contrast Key Operator Data Weekly Timer Weekly Timer How to Access the Weekly Timer Setting Mode Weekly Timer Setting Weekly Timer Copier ON/OFF Time Set Weekly Timer Machine Working Day Individual Set Weekly Timer Lunch Hour Off Function Touch off-time Password Setting Touch Panel Adjustment Power Save 11-41 Memory Switch SW No Setting default is underlined Memory Switch Auto reset timer Auto Reset effectAuto tray switch Load Radf effect Memory Switch No-printing timer Power save key20 5.5x8.5 orig. type 22 1 Shot indication time List Print Application Customize Setting options Density shift 0/ 1/ 2/ 3 standard/ 4 Density Shift Krds Host Index Page Symbol Number Index Iii Index Page August