Konica Minolta 7135, 7130 manual Memory Switch, SW No Setting default is underlined

[12] Memory Switch

This function allows you to change the Memory Settings listed below. See pp. 11- 44~11-46 for details on Memory Settings.

SW No.	Item	Setting (default is underlined)
No. 01: Auto reset timer		OFF / 30 sec. / 60 sec. / 90 sec. / 120 sec./
		150 sec. / 180 sec. / 210 sec. / 240 sec. /
		270 sec. / 300 sec.
No. 02: AUTO RESET effect		Full-Auto / Initial
No. 03: Load RADF effect		RADF / RADF+Auto Reset
No. 04: Non Image A. Erase		ON/ APS/AMS only
No. 05: RADF frame erasure		None / 1mm / 2mm / 3mm / 4mm / 5mm
No. 06: Auto tray switch		OFF / ON
No. 07: Platen APS		OFF / ON
No. 08: RADF APS		OFF / ON
No. 09: ATS/APS (Bypass)		OFF / ON
No. 10: ATS/APS SW (Tray 1)		OFF / ON
No. 11: ATS/APS SW (Tray 2)		OFF / ON
No. 12: ATS/APS SW (Tray 3)		OFF / ON
No. 13: ATS/APS SW (Tray 4)		OFF / ON
No. 14: Platen AMS		OFF / ON
No. 15: RADF AMS		OFF / ON
No. 16: Staple mode reset		OFF / ON
No. 17: Key click sound		OFF / Low / High
No. 18: Job memory recall		OFF / ON
No. 19: Sheet insertion		Tray 1 / Tray 2 / Tray 3 / Tray 4 / Bypass
No. 20: 5.5x8.5 orig.type		Landscape / Portrait
No. 21: Rotation		OFF / ON / APS/AMS/Reduce / APS/AMS
		only / APS only
No. 22:	1 SHOT indication	1 sec. / 2 sec. / 3 sec. / 4 sec. / 5 sec.
No. 23: AUTO START		OFF / ON
No. 24: No- printing timer		OFF / 15 sec. / 30 sec. / 60 sec. / 90 sec.
No. 25: Power save key		Power Save / Shut Off
No. 26: Bypass tray size		Standard size / Non standard size

11-42