ex. Tray 2 failure
Press AUTO to select except this tray
Press [AUTO RESET].
When “Call for Service” Message Is Displayed (continued)
3. Unplug the machine.
4. Contact your service representative and report the condition and code No.
Limited Use of the Copier in Trouble
If the message shown below is displayed on the Call for Service Screen, you may continue operating the copier on a limited function basis and utilize the trays and ADU that are not affected by the trouble. To obtain this limited functionality of the copier, consult your service representative. Be sure to utilize the limited function only temporarily, and arrange for machine repair immediately.
1. If the limited use of the copier is available, the following message is displayed in the message area instead of the Report code.

2.

Please switch ON/OFF

E 18-2

Make note of the Report code No.

3. Turn OFF then ON the power switch.

A copying job can continue without using the troubled portion of the machine (ex. Tray 2).

CAUTION

EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE

ABOVE OPERATION, BE SURE TO CONTACT YOUR SERVICE

REPRESENTATIVE IMMEDIATELY WHEN THE CALL FOR

SERVICE SCREEN IS DISPLAYED.

5-3

5

Trouble- shooting

Call for

Service

Preventive

Maintenance

Clearing

Mishandled

Paper

JAM Key

ADD PAPER

Key

Memory

Overflow

Power OFF/ON

Screen

Troubleshooting

Tips

Page 109
Image 109
Konica Minolta 7130, 7135 manual Turn OFF then on the power switch