Features of the Konica 7022/7130/7135 | Konica Minolta instruction

Features of the Konica 7022/7130/7135

• AES - Automatic Exposure Selection

Automatically adjusts exposure to compensate for quality of the original.

• AMS - Automatic Magnification Selection

Automatically selects an appropriate magnification ratio when Copy Size is selected manually. Automatically selected when the AMS key is touched.

• APS - Automatic Paper Selection

Automatically selects copy paper size to match the original documents.

• ATS - Automatic Tray Switching

Automatically switches tray to allow copying to continue without interruption if the selected tray empties while copying is in progress.

• Auto Layout

The original image on the platen glass or in the document feeder is copied and centered on a sheet.

• Auto Low Power

Automatically lowers the power after a specified period of copier inactivity.

• Auto Reset

Automatically resets to auto mode defaults after a specified period of copier inactivity.

• Auto Shut-Off

Automatically shuts off the main power after a specified period of copier inactivity.

1

Safety Information

2

Machine Information

3

Copying Operations

4

Job Memory &Help Mode

5

Trouble- shooting

6

Machine Specifications

7

Advanced Information

• Book Copy

Copies both pages of an open book or book-size sheet separately onto two letter sheets in 1a1 mode or separately onto each side of one letter sheet in 1a2 mode. You can use the Book Copy mode with the Front or Front/Back cover mode. The cover page(s) will be scanned and copied normally before image division is performed on the other pages.

• Booklet

Creates letter R or ledger size booklets from letter size originals in 1a2 or 2a2 copy mode.

• Chapter

Starts chapter pages on the right side (front pages) of the finished document. Only duplex mode (1a2 or 2a2) is compatible with this feature.

8

Applications

9

Paper & Original Info

10

Maintenance & Supplies

vii 11 Key Operator Mode

Image 11

Konica Minolta manual Features of the Konica 7022/7130/7135

Contents

7022/7130/7135 Workgroup Document System Page Konica 7022/7130/7135 Correspondence Machine Information ContentsSafety Information Basic Contents Machine Specifications Troubleshooting Applications AdvancedAdvanced Information Paper and Original Information Maintenance & SuppliesKey Operator Mode Index Contents Features of the Konica 7022/7130/7135 Features of the Konica 7022/7130/7135 Job Memory Lens Mode RE, ZoomOutput Mode for Machine with FS-107 Finisher Installed Output Mode for Machine with IT-101 Inner Tray Installed Proof Copy Power SaverPaper Capacity Platen Memory Staple Weekly TimerSheet/Cover Insertion StampPage Safety Information BasicMachine Information Page Precautions for Installation and Use Safety Information High Température ¡Temperatura Alta Temperature Élevée Reminder Canadian Department of Communications Regulations RegulationsFCC Regulations FDA Regulations Requirements for Safe Use Power Source Environment Requirements for Safe Use Requirements for Safe Use 21.7 550 17.7 22.8 19.7 450 580 500 26.1 60.0 Precautions for Routine Handling Requirements for Safe Use Requirements for Safe Use Page Power and Loading Paper Machine Configuration, Turning On External Machine Items Machine Configuration Machine Configuration Internal Machine Items Machine ConfigurationTransfer/Separator wire cleaning lever forms the copy image Standard/Optional Equipment Machine Configuration COUNT/SET Basic Screen Machine Configuration Control Panel Layout Turn on the power switch Turning On the Power SwitchTo Turn On the Power Turn on the main power switch Basic Screen will be displayed Turning On the Power Switch Turn OFF the main power switch To Turn Off the PowerTurn OFF the power switch Shutting Off Automatically Auto Shut-Off Reducing the Power in Standby Mode Auto Low Power Power save mode will be activated Turning On the Power SwitchShutting Off / Reducing the Power Manually Start a copying job Entering an ECM Password ECMEnter ECM password Press Start Withdraw the main body tray or DB-210 tray Loading PaperLoading Paper in Main Body Trays and DB-210 Trays Push in the tray until it locks into place Loading PaperStack paper with curl side up Withdraw the DB-410 tray Loading Paper in DB-410 Tray Loading Paper in Multi-Sheet Bypass Tray When copying is completed, close the Multi-sheet bypass tray Set the size indication dial at the correct paper size Changing Paper Size of Main Body Trays and DB-210 TraysWithdraw the tray for which the paper size will be changed Page Copying Operations How to Make a Basic Copy Position originals Face UP in the document feeder tray Adjust paper guidesPositioning Originals Positioning Originals in Radf Document feeder tray Positioning originals in Mixed original modePositioning Originals Positioning originals in Folded original mode Raise the document feeder or platen cover Positioning Original on Platen Glass Positioning Originals Enter the correct quantity Setting Print QuantityTo Set Print Quantity To Change Print Quantity Position originals Selecting Copy SizeTo Select Copy Size Automatically APS 11x17 Selecting Copy Size To Specify Desired Copy Size AMS Original Size AMS Table Select additional copy conditions, as desired Selecting Magnification Ratio Lens ModeTo Copy in 1.00 Magnification Mode Close the Radf securely, then press Auto Reset Touch RE on the Basic Screen Selecting Magnification Ratio Lens ModeTo Copy in Fixed Magnification Mode RE Specification for Fixed Magnification Mode Touch OK To Copy in Zoom ModeSpecification for Zoom Mode Touch Zoom on the Basic Screen Copying To Select Copy Density Selecting Density Level Selecting Density Level Back Front Using RadfMaking Double-Sided Copies 1a2, 2a2 Front Position originals Face UP in the document feeder Making Double-Sided Copies 1a2, 2a2 Position original Face Down on the platen glass Using Platen GlassSpecification for Double-Sided Copying Using Platen Glass Open the document feeder Press Start to print Touch 2a1 on the Basic Screen to highlight it Front Back Press Start Make copying selections, as desired Copying Using MemoryTo Scan Originals into Memory Store Mode Specification for Store Mode Touch Store Mode to highlight it Copying Using Memory Touch Scan on the Basic Screen to scan Touch Reserve to highlight it Specifications for ReserveTo Set Next Copying Job Reserve Press Start to start scanning/printing for the current job Press Start to start scanning for the reserve job Touch JOB List on the Basic Screen Perform the desired setting on the screenTo Check/Control Jobs in Progress Job List Screen Touch OK on the Job List Screen Contents of Job List Screen Specification for Output Modes without Finisher Output Mode for Machine without Finisher Press Output on the control panel Output Mode for Machine without FinisherSelect the desired output mode Output without Finisher Output Mode for Machine with Finisher Specification for Output Modes with Finisher Output Mode for Machine with Finisher Select the desired staple position Output Mode for Machine with Finisher IT-101 Output Modes Check Mode Proof Copy Interrupt Specification for Output Modes with Inner Tray Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Output Mode for Machine with Inner Tray IT-101 Press Check on the control panel Specifications for Check Mode and Proof Copy Checking Feature Selections and Proof Copying Change the print quantity, as required Checking Feature Selections and Proof CopyingTouch Exit or press Check to return to the Basic Screen Press Interrupt on the control panel Interrupt Copying Press Start to start the interrupt copying When Interrupt copying is completed, press Interrupt againInterrupt Copying Set copy conditions, as desired Interrupt Copying How to Use Helpful Functions Job Memory & Help Mode Storing Job Conditions Job Memory Job Store Specifications for Job Memory Touch Entry Review the settings on the Job Store Check ScreenStoring Job Conditions Job Memory Job Store Enter a job name Job Memory Help Mode Recalling Stored Job Settings Job Memory Job Recall Position originals, then press Start to print Recalling Stored Job Settings Job Memory Job RecallIf desired, touch JOB Check Touch the desired key to display specific information To Display the Help Screen from Basic ScreenReturn to the Basic Screen, then press Help Details Help Menu Screen Displaying Screen for Operation Guide Help ModeTouch Exit to return to the Basic Screen Touch Exit To Display Help Screen from Other ScreensWhile in any screen other than the Basic Screen, press Help How to Handle Machine Troubles Troubleshooting Turn OFF the power switch and main power switch When Call for Service Message Is Displayed Turn OFF then on the power switch Preventive Maintenance Touch Guide on the screen Follow the procedure on the screen to remove misfed paperClearing Mishandled Paper Clearing Mishandled Paper When completed, the Basic Screen will be restored Touch Guide When JAM Appears on Folder KeyDisplay the Jam Position Screen Touch Reserve to continue the reserve job setting When JAM Appears on Folder Key Check the empty tray, then supply that tray with paper Display the Basic Screen for the print job in progress Press Start to complete the job ActionWait until the current operation is completed Check the original pages, then position originals again Following message displays When Memory Full Message Is Displayed Memory OverflowPress Start to continue copying Wait about 10 seconds Turn on the power switch When Power OFF/ON Screen Is Displayed Copy Image is TOO Light Troubleshooting Tips Copy Quality is Poor Troubleshooting Tips Please Check Original Troubleshooting TipsPage Main Body & Option Specifications Machine Specifications Main Body Specifications Main Body Specifications Main Body Specifications Option Specifications Page Advanced Page Advanced Information How to Use Advanced Functions Enter the password Programmed Shut-Off Weekly TimerPress the power switch Press Start Set the minute for the interrupt use Programmed Shut-Off Weekly TimerSet the duration for the interrupt use Rotation Touch Auto to deselect it Rotation Vertical/Horizontal Zoom Mode Specifications Vertical/Horizontal Zoom Mode Vertical/Horizontal Zoom Mode Details Applications How to Use Application Functions Touch OK on the Application Selection Screen To Display Application Selection Screen Inserting Sheets and Covers Sheet/Cover Insertion Specifications for Sheet/Cover Insertion Inserting Sheets and Covers Sheet/Cover Insertion Select the cover sheet tray source Select the desired cover modeSelect the desired insertion mode Enter the page number Details Entering Page Numbers Inserting Sheets and Covers Sheet/Cover Insertion Positioning Title Pages on the Right Side Chapter Specifications for Chapter Touch Chapter on the Application Selection Screen When all entries are made, touch OKPositioning Title Pages on the Right Side Chapter Positioning Title Pages on the Right Side Chapter Lay Out Several Pages onto One Sheet Combination Specifications for Combination Touch Combination on the Application Selection Screen Select the desired Combination modeLay Out Several Pages onto One Sheet Combination Original Portrait type Landscape type Details Original Type and Layout Order Making a Multiple Page Signature Booklet Booklet Specifications for Booklet Touch Booklet on the Application Selection Screen Touch to highlight the desired Booklet mode key Touch OKSelect the 1a2 or 2a2 copy mode and the desired paper size Making a Multiple Page Signature Booklet Booklet Position originals Face UP in the document feeder Copying onto Transparent Films Transparency Specifications for Transparency Copying onto Transparent Films Transparency For details on positioning originals, see p -2 to p Inserting Images into Printed Sets Image Insert Specifications for Image Insert Use the control panel keypad to enter the page number Inserting Images into Printed Sets Image InsertTouch Image Insert on the Application Selection Screen Touch Scan Inserting Images into Printed Sets Image InsertTouch Scan on the Basic Screen Scan the platen glass images Dividing an Image into Right and Left Pages Book Copy Specifications for Book Copy Touch Book Copy on the Application Selection Screen Select the desired Book Copy modeDividing an Image into Right and Left Pages Book Copy Select the desired copy mode and magnification Scanning Original for Cover Dividing an Image into Right and Left Pages Book Copy Copying Mixed Size Originals Mixed Original Specifications for Mixed Original Touch Special Original on the Application Selection Screen Copying Mixed Size Originals Mixed Original Position mixed originals Face UP in the document feeder Copying Mixed Size Originals Mixed Original Copying Folded Originals Folded Original Specifications for Folded Original Position folded originals Face UP in the document feeder Copying Folded Originals Folded Original Copying Folded Originals Folded Original Copying Non-Standard Size Originals Non-Standard Size Specifications for Non-Standard Size Touch Non-standard Size Copying Non-Standard Size Originals Non-Standard Size Specifications for Upside Down Reverse the Second Side in 1-2 Mode Upside Down Touch 1-2 Upside down or 2-1 Upside down Reverse the Second Side in 1-2 Mode Upside DownPage Specifications for Text/Photo Enhance Text ModePhoto Mode Increase Contrast Mode Touch OK to return to the Application Selection Screen Making Copy Quality Closer to Originals Text/Photo Enhance Reverse Image Repeat Reversing Color in Black and White Image Reverse Image Specifications for Reverse Image Touch OK on the Application Selection Screen Reversing Color in Black and White Image Reverse ImageTouch Reverse Image on the Application Selection Screen Vertical/Horizontal Width Setting Mode Specifications Repeating Selected Image Area Repeat Verti./Horiz. Mode Touch Repeat on the Application Selection Screen Repeating Selected Image Area Repeat Verti./Horiz. Mode Select the desired magnification and copy size Repeating Selected Image Area Repeat Verti./Horiz. Mode Repeat mode Auto Detection/ Repeat Mode Specifications Touch Auto or Repeat, as desired Touch to highlight the desired mode key Position original Copying Specifications for Frame/Fold Erasure Frame/Fold Erasure Selection Screen will be displayed Touch OK Copying Image in the Center of Copy Paper Auto Layout Specifications for Auto Layout Touch Auto Layout on the Application Selection Screen Details Specifications for Image Shift Adjusting Position of Copy Image Image Shift Touch Image Shift, then specify the shift amount Adjusting Position of Copy Image Image ShiftTouch Image Shift on the Application Selection Screen Adjusting Position of Copy Image Image Shift Reducing Images to Create Binding Margin Reduce&Shift Specifications for Reduce & Shift Touch Reduce & Shift, then specify the shift amount Reducing Images to Create Binding Margin Reduce&Shift Touch OK Erasing Outside of the Original Non-Image Area Erase Specifications for Non-Image Area Erase Select magnification and copy size, as desired Erasing Outside of the Original Non-Image Area Erase Details Oblique Erase and Rectangle Erase Modes Erasing Outside of the Original Non-Image Area Erase Printing Stamp, Page, Watermark onto Copies Stamp Specification for Stamp Touch to select the desired key Printing Stamp, Page, Watermark onto Copies StampTouch Stamp on the Application Selection Screen Printing Stamp, Page, Watermark onto Copies Stamp Touch OK Details Print Position Selection Screen Overlaying an Image onto Each Page Copied in the Job Overlay Specification for Overlay Touch Overlay Touch OK on the Stamp/Overlay Selection Screen Touch STAMP/OVERLAY on the Application Selection Screen Position the originals to be overlaid Page Paper and Original Paper Information Paper Weight Tray/ Exit Tray Capacity Paper Information Paper Size Paper Information To Store Copy Paper Special Paper in Multi-Sheet Bypass Tray Unsuitable Radf Originals Platen Glass Original SpecificationsOriginal Information Platen Glass Originals Radf Originals Normal modeMixed Original mode Original Information Original Information Folded Original mode How to Maintain the Copier Maintenance & Supplies Adding Toner Adding Toner 10-4 Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher Inserting a New Staple Cartridge into FS-107 Finisher 10-8 Cleaning the Document Glass and Cover Cleaning Image Scanning Section Cleaning the Radf Platen Guide Cover Cleaning Image Scanning SectionCleaning the Radf Cleaning the Left Partition Glass Cleaning the Radf Roller Cleaning the Writing Unit Glass and the Electrode Wires Cleaning Image Printing Section Cleaning Image Printing Section Press Counter on the control panel Checking Copy Count Supplies Maintenance, Repairs, SuppliesService RepairsPage Machine Settings How to Monitor Copier Activity and Modify To Display the Key Operator Mode Screen How to Access the Key Operator Mode Touch Return to exit the Key Operator mode How to Access the Key Operator Mode Time System Initial System Initial Language Copier Initial Initial Setting Copier Initial Copy Mode Density Magnification Tray Copier Initial Machine without Finisher OutputMachine with Finisher Machine with Inner Tray Machine with Inner tray Touch Oblique erase or Rectangular erase, as desired Non-Image Erase Preset Key Preset Key Preset Key C.M. Electronic Copy Monitor C.M. Electronic Copy Monitor How to Access the ECM Setting Mode Change ECM Data C.M. Electronic Copy Monitor ECM Data List C.M. Electronic Copy Monitor Reset the count for all ECM password Nos All Counter Reset 11-25 ECM On/Off Setting Copy Limit Reached Effect Lock Job Memory Paper Type Panel Contrast Key Operator Data Weekly Timer How to Access the Weekly Timer Setting Mode Weekly Timer Weekly Timer Setting Weekly Timer Copier ON/OFF Time Set Weekly Timer Machine Working Day Individual Set Weekly Timer Touch off-time Lunch Hour Off Function Password Setting Touch Panel Adjustment 11-41 Power Save SW No Setting default is underlined Memory Switch Memory Switch Load Radf effect Auto reset timerAuto Reset effect Auto tray switch Memory Switch 22 1 Shot indication time No-printing timerPower save key 20 5.5x8.5 orig. type List Print Application Customize Density Shift Setting options Density shift 0/ 1/ 2/ 3 standard/ 4 Krds Host Index Page Number Symbol Index Iii Index Page August