Konica Minolta 7130, 7135 manual Copier Initial, Initial Setting

[2] Copier Initial

Initial settings are the settings that display automatically when the copier is powered on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed. These settings can be changed by the Key Operator, as shown in this section.

Initially (i.e., at installation), the Basic Screen displays the following conditions to meet Energy Star requirements:

Initial Setting

Copy Mode	: 1-1
Copy Density	: AES
Lens Mode	: 1:1
Paper Tray	: APS
Output Mode	: offset sort

When Initial settings are changed by the Key Operator, the new initial settings display when the copier is powered on, when Auto Reset timer is activated, or when [AUTO RESET] key is pressed.

The following initial settings can be changed by the Key Operator:

Copy mode	: [RADF; 1-1, 1-2, 2-2, 2-1]
Copy density	: [AES; manual]
Lens mode	: [AMS; ratio 0.25~4.00]
Paper tray	: [APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray]
Output mode	: [Exit tray 1, 2, 3, 4; Rotation On/Off; Non-sort, Sort,
	Group, Staple; Staple location] (machine with Finisher)
	[Exit tray 1, 2; Group, Rotation sort, Rotation group;
	Rotation On/Off] (machine with Inner tray)
	[Group, Rotation sort, Rotation group; Rotation On/Off]
	(machine without Finisher)
Non-Image
Area Erase	: [Oblique erase, Rectangular erase; Original density]

Setting procedures are described on the following pages.

NOTE:

The most commonly-used settings are established at installation. Before changing any of the copier settings, be sure that you understand the overall and long-range effect of the change.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-711 Key Operator Mode