Konica Minolta 7130, 7135 manual Password Setting

[9] Weekly Timer (continued)

[5] Password Setting

Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry.

Weekly Timer Setting Menu Screen W.T. Interrupt Password Setting Screen

Procedure

1Touch [5] Password setting to display the W.T. Interrupt Password Setting Screen.

2Use the touch screen keypad to enter a 4-digit password, and then touch OK to complete the setting.

NOTE:

When the password setting is 0000, timer interrupt can be used simply by turning the copier OFF, then ON.

3Touch RETURN to return to the Weekly Timer Setting Menu Screen.

4Touch RETURN to restore the Key Operator Mode Screen.

5If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

Key Operator

Mode

System Initial

Copier Initial

Preset Key

E.C.M.

Lock Job

Memory

Paper Type

Panel Contrast

Key Operator

Data

Weekly

Timer

Touch Panel

Adjustment

Power Save

Memory

Switch

List Print

Application Customize

Density Shift

KRDS Host

11-3911 Key Operator Mode