Konica Minolta 7135, 7130 manual Copier Initial, Copy Mode

[2] Copier Initial (continued)

[1] Copy Mode

Set Copy mode to occur after power on or after Auto/Reset occurs.

❒Setting options: RADF; 1-1; 1-2; 2-2; 2-1

❒Default setting: RADF on, 1-1

Key Operator Mode Screen Copier Initial Setting Screen

Copy Mode Initial Setting Screen

Procedure

1Touch [2] Copier Initial on the Key Operator Mode Screen to display the Copier Initial Setting Screen, then touch 1. COPY MODE to display the Copy Mode Initial Setting Screen.

2Touch the setting you want for the initial condition of the copier.

If 1-2, 2-2 or 2-1 mode is selected, RADF will also be selected, automatically. In this case, the RADF must be in a closed position when power is turned ON, or when Auto/ Reset is functioning. Otherwise, the message “Please close RADF” will be displayed.

3Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If other copier initial setting changes are required, touch the desired key.

4Touch RETURN to restore the Key Operator Mode Screen.

5If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.

11-8