Konica Minolta 7130, 7135 manual Machine Configuration

Machine Configuration (continued)

6Job No. icon is displayed when [START] is pressed to start a reserve job of that number.

Your service representative can set the Job No. icon to display the page count while scanning the originals, and also tha copy count when printing job starts, instead of the job number.

7COUNT/SET indicator indicates the print quantity entered from the control panel keypad, and also indicates the print count on the left of the set count while printing.

8Memory indicator indicates the remaining memory available for the next operation.

9SCAN key is touched to start scanning originals when any copy condition which requires Store mode is selected, or Store mode is directly selected on the Applica- tion Selection Screen.

10Paper size/type indication area displays the paper size loaded in each tray and paper type of the selected tray under the “SIZE” indication, if specified by the Key Operator.

11SIZE setting area is used to select the desired copy size or APS.

12LENS setting area is used to select the desired magnification ratio.

13DENSITY setting area is used to specify the desired exposure level.

14MODE setting area is used to select the copy mode (1a1, 1a2, 2a1, or 2a2).

2

Machine Information

Machine

Configuration

Turn On/Off

the Power

Loading

Paper

Changing

Paper Size

2-7