Konica Minolta 7135, 7130 manual Selecting Copy Size, To Select Copy Size Automatically APS

Selecting Copy Size

To select an appropriate copy size for getting your desired copy result, use APS (Automatic Paper Selection), or select copy size manually on the touch screen, as required.

To Select Copy Size Automatically (APS)

APS detects the size of originals placed on the RADF or platen glass and automatically selects and feeds copy paper of the same size, or selects an appropriate size according to the magnification ratio selected.

HINTS

•See the table on the following page for the relation of original size, magnification ratio and copy paper size.

•The initial settings may have been altered by Key Operator. See p. 11-7 to p. 11-14.

1.Touch to highlight APS at lower right corner of the Basic Screen.

APS is already highlighted when the initial settings are restored.

2. Select additional copy conditions, as desired.

3. Enter the desired print quantity from the control panel keypad.

HINT

See p. 3-7 for details on setting print quantity.

4. Position original(s).

HINTS

•See p. 9-6 to p. 9-8 for paper sizes detectable from the RADF or on the platen glass.

•See p. 3-2 to p. 3-6 for details on positioning originals.

•Key Operator can deactivate APS when original is set in the RADF or on the platen glass. See p. 11-42 to p. 11-46.

3-8