6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 44
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
44 Additional settings
When the alarm sounds The volume starts low and increases in steps to maximum after approximately 30 seconds. Press any button to silence the alarm. If no button is pressed, the alarm will stop automatically after a minute.
3.Use or to choose On and select OK. The current setting is displayed.
4.Enter a new alarm time. As new digits are entered they will overwrite the existing time. Select OK. The display shows Alarm On.
5.Press to exit.
If you have more than one handset, you can set a different alarm time on each. The alarm will only go off on the handset on which it was set. Press any button on the handset to stop the alarm ringing.
Switch off an alarm that has been set
1.At the base: Press then scroll or to display Set Time and select using OK.
Or
At the handset: Press Menu, scroll or to Set Time and press OK.
2.Scroll to Alarm and select OK. Then use or to Off and select OK. The displays shows Alarm Off.
3.Press to exit.
If you set the alarm at the base, the alarm will only go off at the base. Press any button on the base to stop the alarm ringing.