6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 55

BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488

Help 55

Cannot dial out or receive calls

nThe batteries may need recharging.

nHas there been a power cut? If so, place the handset back on the base for 10 seconds and try again. If it still does not work disconnect the batteries and mains power for 10 minutes, then reconnect and try again.

You have a dial tone, but the phone will not dial out

nYou may need to change the dial mode from tone to pulse, see page 46.

nIf you are connected to a switchboard, check whether you need to dial an access code.

Handset does not ring

nThe ringer volume may be switched off, see page 40.

nMake sure the handset is registered to the base, see page 48.

icon is flashing

nIs the handset registered correctly to the base? See page 49.

Check that the handset is within range of the base.

Page 55
Image 55
BT 6300 manual Help