Morphy Richards 28034 Battery back-up facility battery not included, Auto dimmer sensor

Battery back-up facility (battery not included)

Unit will work without a battery being fitted

Your clock radio is equipped with a battery back-up facility.

1Remove the battery compartment cover (underneath the unit) by pushing in the clip and lifting off.

2Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted correctly).

3Replace the battery compartment cover.

Should a power interruption occur the clock will continue to run, however, time keeping will not be accurate. The time will be displayed but the backlight will be extinguished to conserve battery life. The memory will retain details of the clock time and alarm settings.

If the optional battery is not installed in case of the AC power failure the clock will start working at 12:00 when power is restored. You will need to reset the clock and alarm settings.

Battery back-up is designed to operate for a short period only.

If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage.

In the interests of environmental safety : dispose of batteries safely.

Auto dimmer sensor

The unit has an automatic dimmer sensor. The clock display will dim automatically depending upon the darkness.

Switching on and setting the clock time

Before any alarm functions can be used, you must set the clock to the correct time.

1Place the unit on a flat surface. Plug the mains plug into the socket and switch on at the wall socket.

2The LCD clock display will light up.

4