AEG 80850 I manual Pause Function, Setting or Changing the Start Delay Timer, washer

	Operating Instructions
	Interrupting the wash programme by opening the door of the dish-
	washer
1	Hot steam can escape when the door is opened. There is a risk of scold-
	ing! Open the door carefully.
0 1.	Open the door of the dishwasher. The wash programme stops.

2.Shut the door. The wash programme continues.

Cancelling the wash programme

0 1. Press the button for the wash programme in progress and keep it pressed. The programme indicator for the wash programme in progress flashes for a few seconds and then goes out.

2.Release the programme button, the wash programme is stopped.

Pause Function

The wash programme can be interrupted for a short period by using the Pause function:

0 1. Press the ON/OFF switch. The wash programme stops.

2.All indicators go out.

3.If after a short period the wash programme is to be continued, press the ON/OFF switch again. The wash programme continues.

2	The wash programme should not be interrupted for an extended period
	of time, as otherwise the wash water will cool down and need to be

reheated thus increasing the electricity consumption.

Setting or Changing the Start Delay Timer

Using the start delay timer you can adjust when the wash programme is to begin within the next 19 hours.

Setting the start delay timer:

0 1. Press the ON/OFF button

2.Keep pressing the DELAY TIMER button until the number of hours of delay until the wash programme is to start are flashing on the multi- display.

3.Press the button for the desired wash programme. The multi-display now displays the number of hours without flashing. The number of hours is saved.

4.The wash programme starts automatically at the end of the delay set.

27