AEG 80850 I manual What to do, when, Fault messages are displayed

Operating Instructions

What to do, when ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee.

...Fault messages are displayed.

•If the multi-display indicates the fault code (2, or the WATER, DOOR or SPRAY ARM indicator illuminates, you can probably rec- tify the fault yourself. Following rectification of a (2 fault or a fault related to the WATER indicator, press the button for the wash pro- gramme that has been started. The wash programme continues. If the fault code is displayed again, contact customer service.

•For all other faults that are indicated, please contact customer serv- ice stating the fault code.

Malfunction	Possible Cause	Remedy
The programme indicator for	Tap is blocked or furred	Clean tap.
	with lime-scale.
the programme selected is
flashing, the WATER indica-	The filter (where present)
tor is illuminated and	in the threaded hose fit-	Clean the filter in the
1 warning tone can be	ting at the water inlet	threaded hose fitting.
heard that is continually	valve is blocked.
repeated: no water is run-	The water inlet hose	Check hose
ning into the dishwasher.
	is not correctly laid.	installation.
The programme indicator for	The siphon is blocked.	Clean siphon.
the selected programme is
flashing, the multi-display is
indicating the fault code (2	The water drain hose	Check hose
and 2 warning tones can be	is not correctly laid.	installation.
heard that are continually
repeated.
The multi-display is indicat-
ing the fault code (3 and	The anti-flood system	Close the tap and contact
3 warning tones can be
	has been triggered.	customer service.
heard that are continually
repeated.

31